Global Standards for the Microelectronics Industry
Standards & Documents Search
| Title | Document # |
Date |
|---|---|---|
SPD Annex L, Serial Presence Detect (SPD) for DDR4 SDRAM Modules, Release 4Release Number: 27A |
SPD4.1.2.L-4 | Aug 2019 |
This annex describes the serial presence detect (SPD) values for all DDR4 modules covered in Document Release 4. Differences between module types are encapsulated in subsections of this annex. These presence detect values are those referenced in the SPD standard document for ‘Specific Features’. Item 2220.01G. This is an editorial revision to the publication in January 2017. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
260-Pin, 1.2 V (VDD), PC4-1600/PC4-1866/PC4-2133/PC4-2400/PC4-2666/PC4-3200 DDR4 SDRAM SODIMM Design SpecificationRelease Number: 29 |
MODULE4.20.25 | Aug 2019 |
This document defines the electrical and mechanical requirements for 260 pin, 1.2 V (VDD), Small Outline, Double Data Rate, Synchronous DRAM Dual In-Line Memory Modules (DDR4 SDRAM SODIMMs). These DDR4 SODIMMs are intended for use as main memory when installed in PCs, laptops and other systems. This document also contains the DDR4 DIMM Label, Ranks Definition. Item 2224.13A A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45.3 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
288-Pin, 1.2 V (VDD), PC4-1600/PC4-1866/PC4-2133/PC4-2400/PC4-2666/PC4-3200 DDR4 SDRAM Unbuffered DIMM Design SpecificationRelease Number: 29 |
MODULE4.20.26 | Aug 2019 |
This specification defines the electrical and mechanical requirements for the 288-pin, 1.2 Volt (VDD), Unbuffered, Double Data Rate, Synchronous DRAM Dual In-Line Memory Modules (DDR4 SDRAM UDIMMs). These DDR4 Unbuffered DIMMs are intended for use as main memory when installed in PCs. Item 2241.13A A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45.3 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
DDR4 DIMM Product Label, Hybrid, Pre-Production, DDR4ERelease Number: 29 |
DIMM-LABEL4.19.4 | Aug 2019 |
This section covers DDR4 and DDR4E in both DRAM-only module types and Hybrid module types, as well as pre-production modules of both types. Item 2224.13A A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
DDR4 DATA BUFFER DEFINITION (DDR4DB02) |
JESD82-32A | Aug 2019 |
This standard defines standard specifications for features and functionality, DC and AC interface parameters and test loading for definition of the DDR4 data buffer for driving DQ and DQS nets on DDR4 LRDIMM applications. Any TBDs as of this document, are under discussion by formulating committee. Item 314.11D *If you downloaded this file between 8/7/2019 and 8/14/2019, please download again, the publication date on the document was incorrected and has been fixed. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-40.4 Free download. Registration or login required. |
||
THERMAL TEST CHIP GUIDELINE (WIRE BOND AND FLIP CHIP) |
JESD51-4A | Jul 2019 |
The purpose of this document is to provide a design guideline for thermal test chips used for integrated circuit (IC) and transistor package thermal characterization and investigations. The intent of this guideline is to minimize the differences in data gathered due to nonstandard test chips and to provide a well-defined reference for thermal investigations. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-15 Free download. Registration or login required. |
||
0.5 V LOW VOLTAGE SWING TERMINATED LOGIC (LVSTL05) |
JESD8-33 | Jun 2019 |
This standard defines power supply voltage range, dc interface, switching parameter and overshoot/undershoot for high speed low voltage swing terminated NMOS driver family digital circuits. The specifications in this standard represent a minimum set of interface specifications for low voltage terminated circuits. Item 159.03 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-16 Free download. Registration or login required. |
||
MECHANICAL SHOCK – DEVICE AND SUBASSEMBLY |
JESD22-B110B.01 | Jun 2019 |
Device and Subassembly Mechanical Shock Test Method is intended to evaluate devices in the free state and assembled to printed wiring boards for use in electrical equipment. The method is intended to determine the compatibility of devices and subassemblies to withstand moderately severe shocks. The use of subassemblies is a means to test devices in usage conditions as assembled to printed wiring boards. Mechanical Shock due to suddenly applied forces, or abrupt change in motion produced by handling, transportation or field operation may disturb operating characteristics, particularly if the shock pulses are repetitive. This is a destructive test intended for device qualification.This document also replaces JESD22-B104. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
288-Pin, 1.2 V (VDD), PC4-1600/PC4-1866/PC4-2133/PC4-2400/PC4-2666/PC4-3200 DDR4 SDRAM Registered DIMM Design SpecificationRelease Number: 29 |
MODULE4.20.28 | May 2019 |
This specification defines the electrical and mechanical requirements for 288-pin, 1.2 Volt (VDD), Registered, Double Data Rate, Synchronous DRAM Dual In-Line Memory Modules (DDR4 SDRAM RDIMMs). These DDR4 Registered DIMMs (RDIMMs) are intended for use as main memory when installed in PCs. Item 2149.05E A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45.1 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
Registration - Silicon Bottom Grid Array Column, 0.048 x 0.0275 Pitch, Rectangular Family Package |
MO-316B | Apr 2019 |
Package Designator: SBGA-M#(#)_I0p055 Item Number: 11.4-966 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.4 Free download. Registration or login required. |
||
Registration - 262 Pin DDR5 SODIMM, 0.50 mm Pitch Socket |
SO-024A | Apr 2019 |
Item 14-193 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.14 Free download. Registration or login required. |
||
Registration - 262 Pin SODIMM, 0.50 mm Pitch Package |
MO-337A | Apr 2019 |
Item 14-192 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.14 Free download. Registration or login required. |
||
Annex C, R/C C, in 288-Pin, 1.2 V (VDD), PC4-1600/PC4-1866/PC4-2133/PC4-2400/PC4-2666/PC4-3200 DDR4 SDRAM Registered DIMM Design SpecificationRelease Number: 29 |
MODULE4.20.28.C | Mar 2019 |
This document defines the electrical and mechanical requirements for Raw Card C, 288-pin, 1.2 Volt (VDD), Registered, Double Data Rate, Synchronous DRAM Dual In-Line Memory Modules (DDR4 SDRAM RDIMMs). These DDR4 Registered DIMMs (RDIMMs) are intended for use as main memory when installed in PCs. Item 2149.49. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45.1 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
LOW POWER DOUBLE DATA RATE 5 (LPDDR5)Status: Superseded JESD209-5A, January 2020 |
JESD209-5 | Feb 2019 |
This document has been replaced by JESD209-5A. Members of JC-42.6 may access a reference copy on the restricted members' website. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-42.6 |
||
Design Requirements - Ball Grid Array Package (BGA) |
DR-4.14J.01 | Feb 2019 |
Item 11.2-948E A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.2 Free download. Registration or login required. |
||
DYNAMIC ON-RESISTANCE TEST METHOD GUIDELINES FOR GaN HEMT BASED POWER CONVERSION DEVICES, VERSION 1.0Status: Reaffirmed November 2024 |
JEP173 | Jan 2019 |
This document is intended for use in the GaN power semiconductor and related power electronic industries, and provides guidelines for measuring the dynamic ON-resistance of GaN power devices. Reaffirmed: November 2024 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
EMBEDDED MULTI-MEDIA CARD (e•MMC), ELECTRICAL STANDARD (5.1) |
JESD84-B51A | Jan 2019 |
This document provides a comprehensive definition of the e•MMC Electrical Interface, its environment, and handling. It also provides design guidelines and defines a tool box of macro functions and algorithms intended to reduce design-in overhead. The purpose of this standard is the definition of the e•MMC Electrical Interface, its environment and handling. It provides guidelines for systems designers. Item 67.14. This document replaces all past versions, however links to the replaced versions are provided here for reference only: JESD84-B51, February 2015; JESD84-B50.1, July 2014 (Editorial revision of JESD84-B50); JESD84-B50, September 2013 (Revision of JESD84-B451); JESD84-B451, June 2012 (Revision of JESD84-B45, June 2011) A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-64 Available for purchase: $327.00 Add to Cart Paying JEDEC Members may login for free access. |
||
SOLID STATE RELIABILITY ASSESSMENT QUALIFICATION METHODOLOGIES |
JEP143D | Jan 2019 |
The purpose of this publication is to provide an overview of some of the most commonly used systems and test methods historically performed by manufacturers to assess and qualify the reliability of solid state products. The appropriate references to existing and proposed JEDEC (or EIA) standards and publications are cited. This document is also intended to provide an educational background and overview of some of the technical and economic factors associated with assessing and qualifying microcircuit reliability. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
GUIDELINES FOR GaAs MMIC PHEMT/MESFET AND HBT RELIABILITY ACCELERATED LIFE TESTING |
JEP118A | Dec 2018 |
These guidelines apply to GaAs Monolithic Microwave Integrated Circuits (MMICs) and their individual component building blocks, such as GaAs Metal-Semiconductor Field Effect Transistors (MESFETs), Pseudomorphic High Electron Mobility Transistors (PHEMTs), Heterojunction Bipolar Transistors (HBTs), resistors, and capacitors. While the procedure described in this document may be applied to other semiconductor technologies, especially those used in RF and microwave frequency analog applications, it is primarily intended for technologies based on GaAs and related III-V material systems (InP, AlGaAs, InGaAs, InGaP, GaN, etc). A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.7 Free download. Registration or login required. |
||
DDR3 DIMM Product LabelRelease Number: 28 |
DIMM-LABEL4.19.3 | Dec 2018 |
This section covers DDR3 DIMM labels. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
DDR2 DIMM Product LabelRelease Number: 28 |
DIMM-LABEL4.19.2 | Dec 2018 |
This section covers DDR2 DIMM labels. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
DDR DIMM Product LabelRelease Number: 28 |
DIMM-LABEL4.19-1 | Dec 2018 |
A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
Numerical Analysis Guidelines for Microelectronics Packaging Design and Reliability |
IPC/JEDEC9301-2018 | Dec 2018 |
This document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model. The intent of this document is to help educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.1 Free download. Registration or login required. |
||
ELECTRICALLY ERASABLE PROGRAMMABLE ROM (EEPROM) PROGRAM/ERASE ENDURANCE AND DATA RETENTION TESTStatus: Reaffirmed October 2024 |
JESD22-A117E | Nov 2018 |
This stress test is intended to determine the ability of an EEPROM integrated circuit or an integrated circuit with an EEPROM module (such as a microprocessor) to sustain repeated data changes without failure (program/erase endurance) and to retain data for the expected life of the EEPROM (data retention). This Standard specifies the procedural requirements for performing valid endurance and retention tests based on a qualification specification. Endurance and retention qualification specifications (for cycle counts, durations, temperatures, and sample sizes) are specified in JESD47 or may be developed using knowledge-based methods as in JESD94. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
Annex A, R/C A, in 260-Pin, 1.2 V (VDD), PC4-1600/PC4-1866/PC4-2133/PC4-2400/PC4-2666/PC4-3200 DDR4 SDRAM SODIMM Design SpecificationRelease Number: 28 |
MODULE4.20.25.A | Nov 2018 |
This document defines the electrical and mechanical requirements for Raw Card A, 260-pin, 1.2 Volt (VDD), Small Outline, Double Data Rate, Synchronous DRAM Dual In-Line Memory Modules (DDR4 SDRAM SODIMMs). These DDR4 SODIMMs are intended for use as main memory when installed in PCs, laptops, and other systems. Item 2228.63. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45.3 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
Design Requirements - Ball Grid Array Package (BGA) |
DR-4.27F.01 | Nov 2018 |
Ball Pitch = 0.65, 0.75 and 0.80 mm, Body sizes >21mm. (For body sizes ≤ 21mm see Design Registration 4.5) Item 11.2-969E. Editorial Change A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.2 Free download. Registration or login required. |
||
Registration - Plastic Bottom Grid Array, Ball 0.70 mm Pitch, Square Family |
MO-336A | Nov 2018 |
Item 11-11.963, Access STP File for MO-336A A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.11 Free download. Registration or login required. |
||
Labeling Requirements for DDR Series DIMMsRelease Number: 28 |
DIMM-LABEL4.19 | Oct 2018 |
This standard provides the labels for the DDR Series DIMMs. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
MECHANICAL COMPRESSIVE STATIC STRESS TEST METHOD |
JESD22-B119 | Oct 2018 |
This test method is intended for customers to determine the ability of a device to withstand the mechanical compressive static stress generated when a heat sink is being initially attached to the device, and to help the customer generate design rules for their heat sink design and validate their thermal solution. This test method does not assess the long-term effects of static stress. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.1 Free download. Registration or login required. |
||
DEVICE QUALITY PROBLEM ANALYSIS AND CORRECTIVE ACTION RESOLUTION METHODOLOGY |
JESD671D | Oct 2018 |
This standard addresses any Customer-initiated device problem analysis/corrective action request and Supplier/Authorized Distributor-identified device nonconformance to specification which may impact the Customer. This standard establishes a common set of Customer, Authorized Distributor and Supplier expectations and requirements that will help to facilitate successful problem analysis and corrective action of device problems, including administrative quality problems, which may affect the Customer. Formerly known as EIA-671 (November 1996). Became JESD671-A after revision, December 1999. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.4 Free download. Registration or login required. |
||
FOUNDRY PROCESS QUALIFICATION GUIDELINES - FRONT END TRANSISTOR LEVEL (Wafer Fabrication Manufacturing Sites) |
JEP001-2A | Sep 2018 |
This document describes transistor-level test and data methods for the qualification of semiconductor technologies. It does not give pass or fail values or recommend specific test equipment, test structures or test algorithms. Wherever possible, it references applicable JEDEC such as JESD47 or other widely accepted standards for requirements documentation. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.2 Free download. Registration or login required. |
||
FOUNDRY PROCESS QUALIFICATION GUIDELINES - BACKEND OF LIFE (Wafer Fabrication Manufacturing Sites) |
JEP001-1A | Sep 2018 |
This document describes backend-level test and data methods for the qualification of semiconductor technologies. It does not give pass or fail values or recommend specific test equipment, test structures or test algorithms. Wherever possible, it references applicable JEDEC such as JESD47 or other widely accepted standards for requirements documentation. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.2 Free download. Registration or login required. |
||
Registration - Plastic Single Sided Hardware 7 Wire 1.2 mm Pitch Package. P-PSXH-W7_I120 |
MO-334A | Sep 2018 |
Item No. 11.14-190 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.14 Free download. Registration or login required. |
||
BOARD LEVEL CYCLIC BEND TEST METHOD FOR INTERCONNECT RELIABILITY CHARACTERIZATION OF SMT ICs FOR HANDHELD ELECTRONIC PRODUCTS |
JESD22-B113B | Aug 2018 |
The Board Level Cyclic Bend Test Method is intended to evaluate and compare the performance of surface mount electronic components in an accelerated test environment for handheld electronic products applications. The purpose is to standardize the test methodology to provide a reproducible performance assessment of surface mounted components while duplicating the failure modes normally observed during product level test. This is not a component qualification test and is not meant to replace any product level test that may be needed to qualify a specific product and assembly. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
JEP131C | Aug 2018 |
This publication applies to electronic components and subassemblies product and or process development, manufacturing processes and the associated performance requirements in customer applications. These areas should include, but are not limited to: package design, chip design, process development, assembly, fabrication, manufacturing, materials, quality, service, and suppliers, as well as the process requirements needed for the next assembly. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.4 Free download. Registration or login required. |
||
Annex M, Serial Presence Detect (SPD) for LPDDR3 and LPDDR4 SDRAM Modules, Document Release 2Release Number: 28 |
SPD4.1.2.M-2 | Aug 2018 |
This annex describes the serial presence detect (SPD) values for all LPDDR modules covered in Document Release 2. Differences between module types are encapsulated in subsections of this annex. These presence detect values are those referenced in the SPD standard document for ‘Specific Features’. Item 2254.02A A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-45 JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
Registration - Plastic Dual Small Outline, Flat, 2 Terminal Package. PDSO-F2. |
DO-221B | Aug 2018 |
Item 11.10-455. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
Standard Practices and Procedures - Package Variation Designators |
SPP-025C | Aug 2018 |
Item No. 11.2-951(S) A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.2 Free download. Registration or login required. |
||
Registration - Plastic Bottom Flatpack 35 Terminal Package. PQFP-N35 |
MO-333A | Aug 2018 |
Item 11.11-952 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
RECOMMENDED ESD TARGET LEVELS FOR HBM/MM QUALIFICATIONStatus: Reaffirmed January 2024 |
JEP155B | Jul 2018 |
This document was written with the intent to provide information for quality organizations in both semiconductor companies and their customers to assess and make decisions on safe ESD level requirements. It will be shown through this document why realistic modifying of the ESD target levels for component level ESD is not only essential but is also urgent. The document is organized in different sections to give as many technical details as possible to support the purpose given in the abstract. In June 2009 the formulating committee approved the addition of the ESDA logo on the covers of this document. Please see Annex C for revision history. Reaffirmed: January 2024 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
REGISTRATION - Ball Grid Array Family Rectangular, 0.60 mm x 0.70 mm Pitch. PBGA |
MO-330A | Jun 2018 |
Item 11.11-955 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
Registration - Bottom Grid Array Ball, Square, 1.00 mm Pitch. PBGA-B. |
MO-331A | Jun 2018 |
Item 11.11-960 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.11 Free download. Registration or login required. |
||
Registration - Ball Grid Array Family, Rectangular, 1.00 mm Pitch. PBGA. |
MO-234E | Jun 2018 |
Item 11.11-954 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
CLASSIFICATION OF PASSIVE AND SOLID STATE DEVICES FOR ASSEMBLY PROCESSES |
J-STD-075A | May 2018 |
This is a Joint Standard between ECIA, IPC, and JEDEC. The purpose of this specification is to establish an agreed to set of worst case solder assembly process conditions to which devices are evaluated. The generated PSL rating will convey the conditions to which a device can be safely attached to FR4 type or ceramic laminates using SMT reflow and solder wave/fountain soldering processes. It is important for device manufacturers (hereafter referred to as “suppliers”), users, and (PWB) assemblers to be highly familiar with this standard’s information and processes to insure optimal device quality and reliability. THIS DOCUMENT IS NOT AVAILABLE FOR FREE DOWNLOAD. However, this document is available to the JEDEC formulating Committee members on the JC-14 Resources tab on the Members' website. The lead organization is ECIA. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14 |
||
JOINT IPC/JEDEC STANDARD FOR HANDLING, PACKING, SHIPPING, AND USE OF MOISTURE/REFLOW SENSITIVE SURFACE-MOUNT DEVICES |
J-STD-033D | Apr 2018 |
The purpose of this document is to provide manufacturers and users with standardized methods for handling, packing, shipping, and use of moisture/reflow and process sensitive devices that have been classified to the levels defined in J-STD-020 or J-STD-075. These methods are provided to avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation. By using these procedures, safe and damage-free reflow can be achieved. The dry-packing process defined herein provides a minimum shelf life of 12 months from the seal date. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
1.8 V HIGH-SPEED LVCMOS (HS_LVCMOS) INTERFACE |
JESD8-31 | Mar 2018 |
This standard defines the dc and ac input levels, output levels, and input overshoot and undershoot specifications for the 1.8 V High-speed LVCMOS (HS_LVCMOS) interface. The non-terminated interface has a switching range that is nominally expected to be 0 V to 1.8 V. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-16 Free download. Registration or login required. |
||
EVALUATION PROCEDURE FOR DETERMINING CAPABILITY TO BOTTOM SIDE BOARD ATTACH BY FULL BODY SOLDER IMMERSION OF SMALL SURFACE MOUNT SOLID STATE DEVICES |
JESD22-A111B | Mar 2018 |
The purpose of this test method is to identify the potential wave solder classification level of small plastic Surface Mount Devices (SMDs) that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid subsequent mechanical damage during the assembly wave solder attachment and/or repair operations. This test method also provides a reliability preconditioning sequence for small SMDs that are wave soldered using full body immersion. This test method, may be used by users to determine what classification level should be used for initial board level reliability qualification. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
TEST METHODS AND ACCEPTANCE PROCEDURES FOR THE EVALUATION OF POLYMERIC MATERIALS:Status: Reaffirmed May 2023 |
JESD72A | Mar 2018 |
This Test Method covers the minimum requirements that should be in effect for the evaluation and acceptance of polymeric materials for use in industrial, military, space, and other special-condition products which may require capabilities beyond standard commercial microelectronics applications. It is not the intent of this Publication to specify a material, but to evaluate the material to assure that the quality and reliability of the microelectronic devices are not compromised. This document replaces JEP105, JEP107 and JEP112. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-13.5 Free download. Registration or login required. |
||
Annex H, Raw Card H, in 288-Pin, 1.2 V (VDD), PC4-1600/PC4-1866/PC4-2133/PC4-2400/PC4-2666/PC4-3200 DDR4 SDRAM Registered DIMM Design SpecificationRelease Number: 28 |
MODULE4.20.28.H | Mar 2018 |
Item 2241.03B - Editorial This specification defines the electrical and mechanical requirements for Raw Card H, 288-pin, 1.2 V (VDD), Registered, Double Data Rate, Synchronous DRAM Dual In-Line Memory Modules (DDR4 SDRAM RDIMMs). These DDR4 Registered DIMMs (RDIMMs) are intended for use as main memory when installed in PCs. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. JESD21-C Solid State Memory Documents Main Page Free download. Registration or login required. |
||
CHIP-PACKAGE INTERACTION UNDERSTANDING, IDENTIFICATION AND EVALUATION |
JEP156A | Mar 2018 |
This publication references a set of frequently recommended and accepted JEDEC reliability stress tests. These tests are used for qualifying new and modified technology/ process/ product families, as well as individual solid state surface-mount products. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
UNIVERSAL FLASH STORAGE HOST CONTROLLER INTERFACE (UFSHCI), Version 3.0Status: Superseded August 2022 by JESD223E |
JESD223D | Jan 2018 |
This document has been superseded by JESD223E, however it is available for reference only. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-64.1 Available for purchase: $141.00 Add to Cart Paying JEDEC Members may login for free access. |
||
UNIVERSAL FLASH STORAGE (UFS), Version 3.0Status: Superseded January 2020 |
JESD220D | Jan 2018 |
This document has been superseded by JESD220E, January 2020, however is available for reference only. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-64.1 Available for purchase: $355.00 Add to Cart Paying JEDEC Members may login for free access. |
||
SPECIAL REQUIREMENTS FOR MAVERICK PRODUCT ELIMINATION AND OUTLIER MANAGEMENTStatus: Reaffirmed |
JESD50C | Jan 2018 |
This standard applies to the identification and control of Maverick Product that can occur during fabrication, assembly, packaging, or test of any electronic component. It can be implemented for an entire product line or to segregate product that has a higher probability of adversely impacting quality or reliability. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
ADAPTER TEST BOARD RELIABILITY TEST GUIDELINES |
JEP176 | Jan 2018 |
This publication describes guidelines for applying JEDEC reliability tests and recommended testing procedures to integrated circuits that require adapter test boards for electrical and A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.3 Free download. Registration or login required. |
||
Registration - Upper PoP Ball Grid Array Family, Square, 0.40 mm Pitch. PBGA |
MO-317C | Jan 2018 |
Item 11.11-949 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-11.11 Free download. Registration or login required. |
||
TEST PROCEDURE FOR THE MANAGEMENT OF SINGLE-EVENT EFFECTS IN SEMICONDUCTOR DEVICES FROM HEAVY ION IRRADIATION: |
JESD57A | Nov 2017 |
This test method defines requirements and procedures for ground simulation and single event effects (SEE) and implementation of the method in testing integrated circuits. This standard is valid when using a cyclotron or Van de Graaff accelerator. Microcircuits under test must be delidded. The ions used at the facilities have an atomic number Z > 2. It does not apply to SEE testing that uses protons, neutrons, or other lighter particles. This standard is designed to eliminate any misunderstanding between users of the method and test facilities, to minimize delays, and to promote standardization of testing and test data. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-13.4 Free download. Registration or login required. |
||
ASSESSMENT OF AVERAGE OUTGOING QUALITY LEVELS IN PARTS PER MILLION (PPM) |
JESD16B | Nov 2017 |
This standard was revised to clarify assumptions necessary to estimate AOQ, revise the minimum sample size algorithm, address small sample size concerns, and provide methods for combining groups for AOQ estimation. Derivation of any new methods for combing groups for AOQ estimation. Derivation of any new methods introduced into this document have been provided in annexes. A statistical method is based on confidence interval statistics. A procedure was established for reporting AOQ when the minimum sample size criterion is not met. Not all sections of EIA-554 are appropriate for use by device manufacturers therefore JEDEC wishes to continue using JESD16. In December 2008 the formulating committee approved to remove EIA-554 (July 1996, Reaffirmed September 2002) from the JEDEC website. To obtain a copy of EIA-554 please contact GEIA at http://www.geia.org/ A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-13 Free download. Registration or login required. |
||
Standard - DDR4 DIMM Socket Insertion and Extraction Force Gauge |
GS-010C | Nov 2017 |
Item 11.14-185 A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Free download. Registration or login required. |
||
FILE NAMING CONVENTION: |
JM19A | Sep 2017 |
Documents are frequently issued by the JEDEC Staff, the JEDEC Board of Directors (BoD), and the JEDEC Committees. It would be highly beneficial for all to use a uniform file-naming convention that would identify these documents by type, source, item or ballot number, date, and format of each file issued. The BoD Software Task Group has developed the file-designation system described below, in response to this need. It is based on an 8.3 file-name format, i.e., eight characters plus an extension of no more than three letters. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-COUN Free download. Registration or login required. |
||
CONSTANT-TEMPERATURE AGING METHOD TO CHARACTERIZE COPPER INTERCONNECT METALLIZATIONS FOR STRESS-INDUCED VOIDING |
JESD214.01 | Aug 2017 |
This document describes a constant temperature (isothermal) aging method for testing copper (Cu) metallization test structures on microelectronics wafers for susceptibility to stress-induced voiding (SIV). This method is to be conducted primarily at the wafer level of production during technology development, and the results are to be used for lifetime prediction and failure analysis. Under some conditions, the method may be applied to package-level testing. This method is not intended to check production lots for shipment, because of the long test time. A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office. Committee(s): JC-14.2 Free download. Registration or login required. |
||
