Standards & Documents Search

This report is the first part of a two part document. Part I will primarily address hard failures characterized by physical damage to a system (failure category d as classified by IEC 61000-4-2). Soft failures, in which the system’s operation is upset without physical damage, are also critical and predominant in many cases.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

The manufacturers identification code is defined by one or more 8 bit fields, each consisting of 7 data bits plus 1 odd parity bit. The manufacturers identification code is assigned, maintained and updated by the JEDEC Office. The intent of this identification code is that it may be used whenever a digital field is required, e.g., hardware, software, documentation, etc. To make a request for an ID Code please go to https://www.jedec.org/standards-documents/id-codes-order-form

Committee(s): JC-42, JC-42.3

Free download. Registration or login required.

Over the last several decades the so called "machine model" (aka MM) and its application to the required ESD component qualification has been grossly misunderstood. The scope of this JEDEC document is to present evidence to discontinue use of this particular model stress test without incurring any reduction in the IC component's ESD reliability for manufacturing. In this regard, the document's purpose is to provide the necessary technical arguments for strongly recommending no further use of this model for IC qualification. The published document should be used as a reference to propagate this message throughout the industry.

Committee(s): JC-14.3

Free download. Registration or login required.

This publication describes guidelines for applying JEDEC reliability tests and recommended testing procedures to integrated circuits that require adapter test boards for electrical and
reliability testing. These tests are used frequently in qualifying integrated circuits as a new
product, a product family, or as products in a process which is being changed.

Committee(s): JC-14.3

Free download. Registration or login required.

The publication provides methodologies for measurements to qualify a new semiconductor wafer process.

Committee(s): JC-14, JC-14.2

Free download. Registration or login required.

This document is intended for use by GaN product suppliers and related power electronic industries. It provides guidelines for evaluating the switching reliability of GaN power switches and assuring their reliable use in power conversion applications. It is applicable to planar enhancement-mode, depletion-mode, GaN integrated power solutions and cascode GaN power switches.

Committee(s): JC-70.1

Free download. Registration or login required.

This document is intended for use in the GaN power semiconductor and related power electronic industries and provides guidelines for test methods and circuits to be used for continuous-switching tests of GaN power conversion devices.

Committee(s): JC-70.1

Free download. Registration or login required.

RAM process node transistor scaling for power and DRAM capacity has made DRAM cells more sensitive to disturbances or transient faults. This sensitivity becomes much worse if external stresses are applied in a meticulously manipulated sequence, such as Rowhammer. Rowhammer related papers have been written outside of JEDEC, but some assumptions used in those papers didn’t explain the problem very clearly or correctly, so the perception for this matter is not precisely understood within the industry. This publication defines the problem and recommends following mitigations to address such concerns across the DRAM industry or academia. Item 1866.01.

Committee(s): JC-42

Free download. Registration or login required.

The scope of this document covers SiC-based PECS devices having a gate dielectric region biased to turn devices on and off. This typically refers to MOS devices such as MOSFETs and IGBTs. In this document, only NMOS devices are discussed as these are dominant for power device applications; however, the procedures apply to PMOS devices as well.

Committee(s): JC-70.2

Free download. Registration or login required.

This publication defines the requirements for Copy-Exact Process (CEP) matching, real-time process control, monitoring, and ongoing assessment of the CEP. The critical element requirements for inputs, process controls, procedures, process indicators, human factors, equipment/infrastructure and matching outputs are given. Manufacturers, suppliers and their customers may use these methods to define requirements for process transfer within the constraints of their business agreements.

Committee(s): JC-14.3

Free download. Registration or login required.

This document describes the impact of measurement and/or setup parameters on switching losses of power semiconductor switches; focusing primarily on SiC MOSFET turn-on losses. In terms of turn-off losses, the behavior of SiC MOSFETs is similar to that of existing silicon based power MOSFETs, and as such are adequately represented in typical datasheets.

Committee(s): JC-70.2

Free download. Registration or login required.

This document provides stress procedures, general failure criteria and documentation guidelines such that the dv/dt robustness can be demonstrated, evaluated and documented. This document gives examples for test setups which can be used and the corresponding test conditions. Additionally, criteria are explained under which device manufacturers can select an appropriate test setup.

Committee(s): JC-70.2

Free download. Registration or login required.

This is a re-publication of a white paper which reports on a survey that has been conducted to better understand how the latch-up standard JESD78 revision E (JESD78E) is interpreted and has been used in the industry.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This document provides guidelines for evaluating gate reliability and lifetime testing for silicon carbide (SiC) based power devices with a gate oxide or gate dielectric.

Committee(s): JC-70, JC-70.2

Free download. Registration or login required.

This standard establishes the requirements for exchanging part data between part manufacturers and their customers for electrical and electronic products. This standard applies to all forms of electronic parts. It covers several sub-sections such as electrical, physical, thermal, assembly process classification data along with materials and substances that may be present in the supplied product or sub-products. This Guideline specifically focuses on the parental structure, under which several sub-section listed above, can be contained and linked together within the Part Model parent structure.

For more information visit the main JEP30 webpage.

Committee(s): JC-11, JC-11.2

Free download. Registration or login required.

This standard establishes the requirements for exchanging part data between part manufacturers and their customers for electrical and electronic products. This standard applies to all forms of electronic parts. It forms part of the Part Model XML Schema, which covers the parental structure for the electrical, physical, Electrical, assembly process classification data along with materials and substances that may be present in the supplied product or subproducts. This Guideline specifically focuses on the “Electrical” sub-section of the Part Model.

For more information visit the main JEP30 webpage.

Committee(s): JC-11, JC-11.2, JC-16

Free download. Registration or login required.

This standard establishes the requirements for exchanging part data between part manufacturers and their customers for electrical and electronic products. This standard applies to all forms of electronic parts. It forms part of the Part Model XML Schema, which covers the parental structure for the electrical, physical, thermal, assembly process classification data along with materials and substances that may be present in the supplied product or sub-products. This Guideline specifically focuses on the "Thermal" subsection of the Part Model.

For more information visit the main JEP30 webpage.

Committee(s): JC-11, JC-11.2, JC-15

Free download. Registration or login required.

This white paper presents an industry-wide survey on the relevance of industry-aligned D2D CDM targets and the currently used targets for D2D interfaces.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

This publication presents guidelines for evaluating the Time Dependent Breakdown (TDB) reliability of GaN power switches.

Committee(s): JC-70, JC-70.1

Free download. Registration or login required.