Global Standards for the Microelectronics Industry
Standards & Documents Search
Title | Document # |
Date![]() |
---|---|---|
TERMINOLOGY AND METHODS OF MEASUREMENT FOR BISTABLE SEMICONDUCTOR MICROCIRCUITS: |
JEB15 | Jan 1969 |
This bulletin explains the terminology and methods of measurement for bistable semiconductor microcircuits. It is also intended to be used with the EIA Registration Data Format for semiconductor integrated bistable logic circuits. Committee(s): JC-40 |
||
RECOMMENDED CHARACTERIZATION OF MOS SHIFT REGISTERS: |
JEB19 | Jan 1972 |
This recommendation applies to MOS Shift Registers. Definitions are given for P-channel registers but are applicable to all CMOS and N-channel with changes in power supply notation. Committee(s): JC-40 |
||
STANDARD SPECIFICATION FOR DESCRIPTION OF B SERIES CMOS DEVICES: |
JESD13-B | May 1980 |
This standard provides for uniformity, multiplicity of sources, elimination of confusion, and ease of device specifications and system design by users. It gives electrical levels and timing diagrams for B Series CMOS devices. Committee(s): JC-40.2 Free download. Registration or login required. |
||
DIGITAL BIPOLAR LOGIC PINOUTS FOR CHIP CARRIERS: |
JESD2 | Dec 1982 |
This standard provides a chip carrier format for digital devices by defining pin functions and locations for 20, 38, 44, 52, and 68-terminal devices. Committee(s): JC-40.1 Free download. Registration or login required. |
||
CHIP CARRIER PINOUTS STANDARDIZED FOR CMOS 4000, HC AND HCT SERIES OF LOGIC CIRCUITS: |
JESD11 | Dec 1984 |
This standard indicates the procedures used to convert existing DIP and flat packages for digital parts (SSI & MSI) to chip carrier packages. Committee(s): JC-40.2 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 54/74HCXXXX AND 54/74HCTXXXX HIGH SPEED CMOS DEVICES: |
JESD7-A | Aug 1986 |
This standard provides uniformity, multiplicity of sources, eliminate confusion, and ease of device specification and design by users for HC, and HCT CMOS devices. This standard specifies electrical parameters. It also includes appendices listing part numbers. Committee(s): JC-40.2 Free download. Registration or login required. |
||
LATCH-UP IN CMOS INTEGRATED CIRCUITS - SUPERSEDED BY JESD78, February 1999Status: RescindedFebruary 1999 |
JESD17 | Aug 1988 |
This document is no longer available via the JEDEC website to obtain a copy please contact JEDEC. Committee(s): JC-40.2 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 54/74ACXXXXX AND 54/74ACTXXXXX ADVANCED HIGH-SPEED CMOS DEVICES:Release Number: Pt 2 |
JESD20 | Jan 1990 |
This standard describes electrical parameters for this class of CMOS devices. Committee(s): JC-40.2 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 54/74ACXXXXX AND 54/74ACTXXXXX ADVANCED HIGH-SPEED CMOS DEVICES:Release Number: Pt 1 |
JESD20 | Jan 1990 |
This standard describes electrical parameters for this class of CMOS devices. Committee(s): JC-40.2 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF FAST CMOS TTL COMPATIBLE LOGIC: |
JESD18-A | Jan 1993 |
The purpose of this standard is to provide for uniformity, multiplicity of sources, elimination of confusion, and ease of device specification and design by users. The standard covers specifications for description of '54/74FCTXXXX' series fast CMOS TTL compatible devices. Committee(s): JC-40.2 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF LOW VOLTAGE TTL-COMPATIBLE CMOS LOGIC DEVICES: |
JESD52 | Nov 1995 |
This standard describes dc interface specifications and test environment for these devices that operate with 2.7 V to 3.6 V power supplies. The goal is to provide a consistent set of dc specifications for reference by logic suppliers and users alike. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 54/74ABTXXX AND 74BCXXX TTL-COMPATIBLE BiCMOS LOGIC DEVICES: |
JESD54 | Feb 1996 |
The purpose is to provide a standard of BiCMOS Logic series specifications to provide for uniformity, multiplicity of sources, elimination of confusion, and ease of device specification and design by users. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF LOW-VOLTAGE TTL-COMPATIBLE BiCMOS LOGIC DEVICES: |
JESD55 | May 1996 |
The purpose is to provide a standard of BiCMOS Logic series specifications for uniformity, multiplicity of sources, elimination of confusion, and ease of device specification and design by users. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD DESCRIPTION OF LOW-VOLTAGE TTL-COMPATIBLE, 5 V TOLERANT CMOS LOGIC DEVICES: |
JESD36 | Jun 1996 |
This standard outlines the standard dc specifications, test conditions, and test loading for logic products that are designed to tolerate input and output voltages which exceed the device's power supply. More specifically this standardizes 5 V - tolerant logic prducts that run from 'low voltage' (2.7 V to 3.6 V) power supplies. Products that meet this standard can be used to effectively interface between LVCMOS/LVTTL and 5 V TTL buses, bridging the gap between low-voltage and 5 V TTL busses. Committee(s): JC-40 Free download. Registration or login required. |
||
2.5 V BiCMOS LOGIC DEVICE FAMILY SPECIFICATION WITH 5 V TOLERANT INPUTS AND OUTPUTS: |
JESD70 | Jun 1999 |
The purpose is to provide a standard for 2.5 V nominal supply voltage logic devices, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use, thus providing compatibility between devices operating between 2.3 V and 2.7 V supply voltages, as well as overvoltage tolerance with devices operating at 3.3 V, or 5 V. Committee(s): JC-40 Free download. Registration or login required. |
||
DESCRIPTION OF 5 V BUS SWITCH WITH TTL-COMPATIBLE CONTROL INPUTS: |
JESD73 | Jun 1999 |
This standard covers specifications for a family of 5 V NMOS FET bus switch devices with 5 V TTL compatible control inputs. Not included in this document are device-specific parameters and performance levels that the vendor must also apply for full device description. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 2.5 V CMOS LOGIC DEVICES: |
JESD80 | Nov 1999 |
The purpose of this standard is to provide a standard for 2.5 V nominal supply-voltage CMOS logic devices, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. This standard defines dc interface parameters and test loading for CMOS digital logic family based on 2.5 V (nominal) power supply levels at 2.5 V input tolerance. Committee(s): JC-40 Free download. Registration or login required. |
||
BALL GRID ARRAY PINOUTS STANDARDIZED FOR 32-BIT LOGIC FUNCTIONS: |
JESD75 | Nov 1999 |
The purpose of this standard is to provide a pinout standard for dual-die 32-bit logic devices offered in a 96- and 144-ball grid array package for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease use. This standard defines device output for 32-bit wide buffer, driver and transceiver functions. This pinout specifically applies to the conversion of DIP-packaged 16-bit logic devices to LFBGA-packaged dual-die 32-bit logic devices. Committee(s): JC-40 Free download. Registration or login required. |
||
DESCRIPTION OF 1.8 V CMOS LOGIC DEVICES: |
JESD76 | Apr 2000 |
This standard continues the voltage specification migration to the next level beyond the 2.5 V specification already established in JESD80. In this standard, the input and output conditions are described for CMOS Logic products in a 1.8 V (Normal Range) application. Committee(s): JC-40.1 Free download. Registration or login required. |
||
DEFINITION OF CDCV857 PLL CLOCK DRIVER FOR REGISTERED DDR DIMM APPLICATIONS: |
JESD82 | Jul 2000 |
This specification is a reference for Registered DDR DIMM designers. JESD82 defines the physical, electrical, interface and timing requirements of a 1:10 PLL clock driver for DDR Registered DIMMs from DDR200 to DDR266 as refined in revision C of JEDEC Standard 21-C (JESD21-C). JESD82 was also written to meet the future performance requirements of Registered DIMMs for DDR300 and DDR333. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 2.5 V CMOS LOGIC DEVICES WITH 3.6 V CMOS TOLERANT INPUTS AND OUTPUTS: |
JESD64-A | Oct 2000 |
The purpose is to provide a standard for 2.5 V nominal supply voltage logic devices for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. This specification provides for compatibility between devices operating between either the Standard Range of 1.8 V to 2.7 V or the optional Extended Range of 1.65 V to 2.7 V supply voltages, as well as over-voltage tolerance with devices operating at 3.6 V. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD DESCRIPTION OF 1.2 V CMOS LOGIC DEVICES (NORMAL RANGE OPERATION): |
JESD76-2 | Jun 2001 |
This standard defines dc interface, switching parameters and test loading for digital logic devices based on 1.2 V (normal range) power supply levels. The purpose is to provide a standard specification for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD DESCRIPTION OF 1.2 V CMOS LOGIC DEVICES (WIDE RANGE OPERATION): |
JESD76-1 | Jun 2001 |
This standard defines dc interface, switching parameters and test loading for digital logic devices based on 1.2 V (nominal) power supply levels. The purpose is to provide a standard specification for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF A 3.3 V, 18-BIT, LVTTL I/O REGISTER FOR PC133 REGISTERED DIMM APPLICATIONS: |
JESD82-2 | Jul 2001 |
This standard defines the register support devices needed for standard height and low profile registered PC133 SDRAM DIMM modules. The objective of the standard is to clearly define the functionality, pinout and electrical characteristics required for this type of SDRAM module. Committee(s): JC-40 Free download. Registration or login required. |
||
BALL GRID ARRAY PINOUTS STANDARDIZED FOR 16-BIT LOGIC FUNCTIONS: |
JESD75-2 | Jul 2001 |
This standard provides a pinout standard for 16-bit wide logic devices offered in a 56-ball areagrid array package to provide for uniformity, multiplicity of sources, elimination of confusion,ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
BALL GRID ARRAY PINOUTS STANDARDIZED FOR 8-BIT LOGIC FUNCTIONS: |
JESD75-3 | Jul 2001 |
This standard provides a pinout standard for 8-bit logic devices offered in a 20-ball area gridarray package to provide for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD DESCRIPTION OF 1.5 V CMOS LOGIC DEVICES: |
JESD76-3 | Aug 2001 |
This standard continues the voltage specification migration to the next level beyond the 1.8 V specification already established. The purpose is to provide a standard for 1.5 V nominal supply voltage CMOS logic devices, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 3.3 V NFET BUS SWITCH DEVICES: |
JESD73-1 | Aug 2001 |
This standard covers specifications for a family of 3.3 V NMOS FET bus switch devices. Not included in this document are device specific parameters and performance levels that the vendor must also supply for full device description. The purpose of this document is to provide a set of uniform data sheet parameters for the description of bus switch devices. This standard includes required parameters, test conditions, test levels, and measurement methods for data sheet descriptions of bus switch devices. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 3.3 V NFET BUS SWITCH DEVICES WITH INTEGRATED CHARGE PUMPS: |
JESD73-2 | Aug 2001 |
This standard covers specifications for a family of 3.3 V NMOS FET bus switch devices with integrated charge pumps. Not included in this document are device specific parameters and performance levels that the vendor must also supply for full device description. The purpose of this standard is to provide a set of uniform data sheet parameters for the description of bus switch devices. This standard includes required parameters, test conditions, test levels, and measurement methods for data sheet descriptions of bus switch devices. Committee(s): JC-40 Free download. Registration or login required. |
||
BALL GRID ARRAY PINOUTS STANDARDIZED FOR 16, 18, AND 20-BIT LOGIC FUNCTIONS USING A 54 BALL PACKAGE: |
JESD75-1 | Oct 2001 |
This standard establishes a 54 Ball Grid Array pinout for 16, 18 and 20-bit standard logic devices that are currently being produced in 48 and 56 Pin SSOP and TSSOP packages. The 54 Ball Grid Array Package is organized as a 6 x 9 array with balls on a .8mm x .8mm grid pitch. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 3877 - 2.5 V, DUAL 5-BIT, 2-PORT, DDR FET SWITCH: |
JESD73-4 | Nov 2001 |
This standard provides a set of uniform data sheet parameters for the description of a dual 5-bit, 2.5 V FET transmission-gate bus switch device for DDR memory module and motherboard applications. This bus switch device has a low ON resistance allowing inputs to be connected directly to outputs, with near zero propagation delay. Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF 3867 - 2.5 V, SINGLE 10-BIT, 2-PORT, DDR FET SWITCH: |
JESD73-3 | Nov 2001 |
This standard provides a set of uniform data sheet parameters for the description of a single 10-bit, 2.5 V FET transmission-gate bus switch device for DDR memory module and motherboard applications. This bus switch device has a low ON resistance allowing inputs to be connected directly to outputs, with near zero propagation delay. Free download. Registration or login required. |
||
STANDARD FOR DESCRIPTION OF A 3.3 V, ZERO DELAY CLOCK DISTRIBUTION DEVICE COMPLIANT WITH THE JESD21-C PC133 REGISTERED DIMM SPECIFICATION |
JESD82-5 | Jul 2002 |
This standard defines the PLL support devices required for standard height and low profile registered PC133 SDRAM DIMM modules. The objective of the standard is to clearly define the functionality, pinout and electrical characteristics of the PLL used on JEDEC standard modules.JESD82-5 is the latest specification to be added to the JESD82 family of specifications for memory module support devices. Additional specifications are currently under development for DDR2 support devices. Committee(s): JC-40 Free download. Registration or login required. |
||
DEFINITION OF SKEW SPECIFICATIONS FOR STANDARD LOGIC DEVICES: |
JESD65B | Sep 2003 |
This standard defines skew specifications and skew testing for standard logic devices. The purpose is to provide a standard for specifications to achieve uniformity, multiplicity of sources, elimination of confusion, and ease of device specification and design by users. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DEFINITION OF CU877 PLL CLOCK DRIVE FOR REGISTERED DDR2 DIMM APPLICATION |
JESD82-8.01 | Feb 2004 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of a íCU877 PLL clock device for registered DDR2 DIMM applications. The purpose is to provide a standard for a íCU877 PLL clock device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. This document includes minor editorial changes as noted in Annex A, page 16. Committee(s): JC-40 Free download. Registration or login required. |
||
BALL GRID ARRAY PINOUT FOR 1-, 2-, AND 3-BIT LOGIC FUNCTIONS: |
JESD75-4 | Mar 2004 |
This standard defines device pinout for 1-, 2- and 3-bit wide logic functions. This pinout specifically applies to the conversion of Dual-Inline-Packaged (DIP) 1-, 2- and 3-bit logic devices to DSBGA-packaged 1-, 2- and 3-bit logic devices. Committee(s): JC-40 Free download. Registration or login required. |
||
DEFINITION OF CVF857 PLL CLOCK DRIVER FOR REGISTERED PC1600, PC2100, PC2700, AND PC3200 DIMM APPLICATIONS: |
JESD82-1A | May 2004 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of a CV857 PLL clock device for registered PC1600, PC2100, PC2700 and PC3200 DIMM applications. The purpose is to provide a standard for a CV857 PLL clock device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
SON/QFN PACKAGE PINOUTS STANDARDIZED FOR 1-, 2-, AND 3-BIT LOGIC FUNCTIONS |
JESD75-5 | Jul 2004 |
This standard defines device pinout for 1-, 2- and 3-bit wide logic functions. This pinout specifically applies to the conversion of Dual-Inline-Packaged (DIP) 1-, 2- and 3-bit logic devices to SON/QFN packaged 1-, 2- and 3-bit logic devices. The purpose of this document is to provide a pinout standard for 1-, 2- and 3-bit logic devices offered in 5-, 6- or 8-land SON/QFN packages for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Free download. Registration or login required. |
||
DEFINITION OF CU878 PLL CLOCK DRIVER FOR REGISTERED DDR2 DIMM APPLICATIONS |
JESD82-11 | Sep 2004 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of a CU878 PLL clock device for registered DDR2 DIMM applications. The purpose is to provide a standard for a CU878 PLL clock device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Free download. Registration or login required. |
||
STANDARD TEST LOADS FOR DUAL-SUPPLY LEVEL TRANSLATION DEVICES |
JESD203 | Nov 2005 |
This standard defines ac test loads for dual-supply level translation devices. Uniform test loads enable easy comparison of electrical parameters of dual-supply level translation devices across functions, logic families and IC suppliers. This standard is only intended to apply to devices released subsequent to th Free download. Registration or login required. |
||
STANDARD FOR DEFINITION OF CUA878 PLL CLOCK DRIVER FOR REGISTERED DDR2 DIMM APPLICATIONS |
JESD82-15 | Nov 2005 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of a CUA878 PLL clock device for registered DDR2 DIMM applications. The purpose is to provide a standard for a CUA878 PLL clock device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
PSO-N/PQFN PINOUTS STANDARDIZED FOR 14-, 16-, 20-, AND 24-LEAD LOGIC FUNCTIONS: |
JESD75-6 | Mar 2006 |
This standard defines device pinouts for 14-, 16-, 20-, and 24-lead logic functions. This pinout standard specifically applies to the conversion of DIP-packaged logic devices to PSO-N/PQFN packages logic devices The purpose of this standard is to provide a pinout standard for 14-, 16-, 20-, and 24-lead logic devices offered in 14-, 16-, 20-, and 24-lead PSO-N/PQFN packages for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use Free download. Registration or login required. |
||
STANDARD FOR DEFINITION OF THE CUA877 AND CU2A877 PLL CLOCK DRIVERS FOR REGISTERED DDR2 DIMM APPLICATIONS |
JESD82-18A | Jan 2007 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of the CUA877 and CU2A877 PLL clock devices for registered DDR2 DIMM applications.The purpose is to provide a standard for the CUA877 and CU2A877 PLL clock devices, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DEFINITION OF CUA845 PLL CLOCK DRIVER FOR REGISTERED DDR2 DIMM APPLICATIONS |
JESD82-21 | Jan 2007 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of a CUA845 PLL clock device for registered DDR2 DIMM applications.The purpose is to provide a standard for a CUA845 PLL clock device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Committee(s): JC-40 Free download. Registration or login required. |
||
DDR4 PROTOCOL CHECKS |
JEP175 | Jul 2017 |
The intended use of this document is for the validation and debug of DDR4 based designs. This document contains protocol checks, sometimes referred to as memory access rules or protocol violations. This document contains a list of checks that can be used during the verification or debug stages of development to check that accesses to a DDR4 DRAM adhere to JESD79-4B. These checks are derived from JESD79-4B. Item 31509. Committee(s): JC-40.5 Free download. Registration or login required. |
||
DDR4 DATA BUFFER DEFINITION (DDR4DB02) |
JESD82-32A | Aug 2019 |
This standard defines standard specifications for features and functionality, DC and AC interface parameters and test loading for definition of the DDR4 data buffer for driving DQ and DQS nets on DDR4 LRDIMM applications. Any TBDs as of this document, are under discussion by formulating committee. Item 314.11D *If you downloaded this file between 8/7/2019 and 8/14/2019, please download again, the publication date on the document was incorrected and has been fixed. Patents(): A complete list of Assurance/Disclosure Forms is available to JEDEC members in the Members Area. Non-members can obtain individual Assurance/Disclosure Forms on request from the JEDEC office. Committee(s): JC-40.4 Free download. Registration or login required. |
||
DDR5 REGISTERING CLOCK DRIVER DEFINITION (DDR5RCD01) |
JESD82-511 | Aug 2021 |
This document defines standard specifications of DC interface parameters, switching parameters, and test loading for definition of the DDR5 Registering Clock Driver (RCD) with parity for driving address and control nets on DDR5 RDIMM and LRDIMM applications. The DDR5RCD01 Device ID is DID = 0x0051. Committee(s): JC-40.4 Free download. Registration or login required. |
||
DEFINITION OF THE SSTUB32868 1.8 V CONFIGURABLE REGISTERED BUFFER WITH PARITY FOR DDR2 RDIMM APPLICATIONS |
JESD82-14A.01 | Oct 2021 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of the SSTUB32868 registered buffer with parity test for DDR2 RDIMM applications. SSTU32S2868 denotes a single-die implementation and SSTU32D868 denotes a dual-die implementation. This is a minor editorial revision as shown in Annex A of the document. Committee(s): JC-40 Free download. Registration or login required. |
||
STANDARD FOR DEFINITION OF THE SSTV16859 2.5 V, 13-BIT TO 26-BIT SSTL_2 REGISTERED BUFFER FOR STACKED DDR DIMM APPLICATIONS: |
JESD82-4B.01 | Oct 2021 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of the SSTV16859 13-bit to 26-bit SSTL_2 registered buffer for stacked DDR DIMM applications. The purpose is to provide a standard for the SSTV16859 logic device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. This is a minor editorial revision, shown in Annex A of the document. Committee(s): JC-40 Free download. Registration or login required. |
||
DEFINITION OF SSTU32865 REGISTERED BUFFER WITH PARITY FOR 2R x 4 DDR2 RDIMM APPLICATIONS |
JESD82-9B.01 | Oct 2021 |
This standard provides the functional definition, ball-out configuration and package outline, signal definitions and input/output characteristics for a 28-bit 1:2 registered driver with parity suitable for use on DDR2 RDIMMs. The SSTU32865 integrates the functional equivalent of two SSTU32864 devices (as defined in JESD82-7) into a single device, thereby easing layout and board design constraints especially on high density RDIMMs such as dual rank, by four configurations. Moreover, the optional use of a parity function is provided for, permitting detection and reporting of parity errors across its 22 data inputs. JESD82-9 specifies a 160-pin Thin-profile, fine-pitch ball-grid array (TFBGA) package. This is a minor editorial revision as shown in Annex A of the document. Free download. Registration or login required. |
||
DEFINITION OF THE SSTUA32866 1.8 V CONFIGURABLE REGISTERED BUFFER WITH PARITY TEST FOR DDR2 RDIMM APPLICATIONS |
JESD82-16A.01 | Oct 2021 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of the SSTUA32866 registered buffer with parity test for DDR2 RDIMM applications. The purpose is to provide a standard for the SSTUA32866 (see Note) logic device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. This is a minor editorial revision as shown in Annex A of the document. Free download. Registration or login required. |
||
DEFINITION OF THE SSTU32866 1.8 V CONFIGURABLE REGISTERED BUFFER WITH PARITY FOR DDR2 RDIMM APPLICATIONS |
JESD82-10A.01 | Oct 2021 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of the SSTU32866 registered buffer with parity test for DDR2 RDIMM applications. The purpose is to provide a standard for the SSTU32866 (see Note) logic device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. This is a minor editorial revision as shown in Annex A of the document. Free download. Registration or login required. |
||
DEFINITION OF THE SSTUA32S865 AND SSTUA32D865 28-BIT 1:2 REGISTERED BUFFER WITH PARITY FOR DDR2 RDIMM APPLICATIONS |
JESD82-19A.01 | Oct 2021 |
This standard defines standard specifications of dc interface parameters, switching parameters, and test loading for definition of the SSTUA32S865 and SSTUA32D865 registered buffer with parity for 2 rank by 4 or similar high-density DDR2 RDIMM applications. This is a minor editor revision as shown in Annex A of the document. Committee(s): JC-40 Free download. Registration or login required. |
||
DDR5 Buffer Definition (DDR5DB01) - Rev. 1.1 |
JESD82-521 | Dec 2021 |
This standard defines standard specifications for features and functionality, DC & AC interface parameters and test loading for definition of the DDR5 data buffer for driving DQ and DQS nets on DDR5 LRDIMM applications. The purpose is to provide a standard for the DDR5DB01 (see Note) logic device, for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Item 323.98K Committee(s): JC-40.4 Free download. Registration or login required. |
||
PMIC5100 POWER MANAGEMENT IC STANDARD, Rev 1.03 |
JESD301-2 | Oct 2022 |
This standard defines the specification of interface parameters, signaling protocols, and features for PMIC devices used for memory module applications. The designation PMIC5100 refers to the device specified by this document. The purpose is to provide a standard for the PMIC5100 device for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Item 336.01C Committee(s): JC-40.1 Free download. Registration or login required. |
||
FBDIMM: ADVANCED MEMORY BUFFER (AMB) |
JESD82-20A.01 | Jan 2023 |
This document is a core specification for a Fully Buffered DIMM (FBD) memory system. This document, along with the other core specifications, must be treated as a whole. Information critical to a Advanced Memory Buffer design appears in the other specifications, with specific cross-references provided. Patents(): There are known patent issues that are common to all FBDIMM related specifications. See document for link to FBDIMM Patents. Committee(s): JC-40 Free download. Registration or login required. |
||
DEFINITION OF the SSTUA32S869 AND SSTUA32D869 REGISTERED BUFFER WITH PARITY FOR DDR2 RDIMM APPLICATIONS |
JESD82-23.01 | Jan 2023 |
Terminology update. Committee(s): JC-40 Free download. Registration or login required. |
||
DEFINITION OF THE SSTUB32868 REGISTERED BUFFER WITH PARITY FOR 2R x 4 DDR2 RDIMM APPLICATIONS |
JESD82-26.01 | Jan 2023 |
Terminology update. Committee(s): JC-40 Free download. Registration or login required. |
||
DDR4 REGISTERING CLOCK DRIVER (DDR4RCD02) |
JESD82-31A.01 | Jan 2023 |
Terminology update. This document defines standard specifications of DC interface parameters, switching parameters, and test loading for definition of the DDR4 Registering Clock Driver (RCD) with parity for driving address and control nets on DDR4 RDIMM and LRDIMM applications. Patents(): A complete list of Assurance/Disclosure Forms is available to JEDEC members in the Members Area. Non-members can obtain individual Assurance/Disclosure Forms on request from the JEDEC office. Committee(s): JC-40.4 Free download. Registration or login required. |
||
DEFINITION OF the SSTUB32866 1.8 V CONFIGURABLE REGISTERED BUFFER WITH PARITY FOR DDR2 RDIMM APPLICATIONS |
JESD82-25.01 | Jan 2023 |
Terminology update. Committee(s): JC-40 Free download. Registration or login required. |