Global Standards for the Microelectronics Industry
Standards & Documents Search
| Title | Document # | Date |
|---|---|---|
ADDENDUM No. 3A to JESD8 - GUNNING TRANSCEIVER LOGIC (GTL) LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-3A | May 2007 |
This Addendum No. 3 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices. Patents(): 5,023,488 Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 4 to JESD8 - CENTER-TAP-TERMINATED (CTT) INTERFACE LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-4 | Nov 1993 |
This Addendum No. 4 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices that can be a super-set of LVCMOS and LVTTL. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 6 to JESD8 - HIGH SPEED TRANSCEIVER LOGIC (HSTL)- A 1.5 V OUTPUT BUFFER SUPPLY VOLTAGE BASED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-6 | Aug 1995 |
This standard is a 1.5 volt high performance CMOS-based interface document suitable for high I/O count CMOS and BiCMOS devices operating at frequencies in excess of 200 Mhz. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 7 to JESD8 - 1.8 V + -0.15 V (NORMAL RANGE), AND 1.2 V - 1.95 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT: |
JESD8-7A | Jun 2006 |
This standard continues the voltage specification migration to the next level beyond the 2.5 V specification already established. Since this migration is driven by both process changes and performance/power, more entries can be expected in supporting required voltage levels. The rapidity of this evolution is expecting to increase because of the same feature sizes expected. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 9B to JESD8 - STUB SERIES TERMINATED LOGIC FOR 2.5 VOLTS (SSTL_2): Includes Errata and Corrected Page 7 as of October 18, 2002. |
JESD8-9B | May 2002 |
This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the SSTL_2 logic switching range, nominally 0 V to 2.5 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. This standard has been developed particularly with the objective of providing a relatively simple upgrade path from MOS push-pull interface designs. The standard is particularly intended to improve operation in situations where busses must be isolated from relatively large stubs. Committee(s): JC-16 Free download. Registration or login required. |
||
