Global Standards for the Microelectronics Industry
Standards & Documents Search
Title | Document # | Date |
---|---|---|
ADDENDUM No. 11A.01 to JESD8 - 1.5 V +/- 0.1 V (NORMAL RANGE) AND 0.9 - 1.6 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUITS: |
JESD8-11A.01 | Sep 2007 |
This new standard provides specifications that will be used by several companies in new 1.5 V products designed in 0.12-0.15 um CMOS technologies, and in components that interface with them. The specifications allow limited interoperability with products using the existing JEDEC HSTL specification (JESD8-6). This version is a minor editorial revision as noted in Annex A. Committee(s): JC-16 Free download. Registration or login required. |
||
INTERFACE STANDARD FOR NOMINAL 3.0 V/3.3 V SUPPLY DIGITAL INTEGRATED CIRCUITS: |
JESD8C.01 | Sep 2007 |
This standard (a replacement of JEDEC Standards No. 8, 8-1, 8-1-A, and 8-A) defines dc interface parameters for a family of digital circuits operating from a power supply of nominal 3.0 V/3.3. V and driving/driven by parts of the same family. The specifications in this standard represent a minimum set of 'base line' set of interface specifications for LVTTL-compatible and LVCMOS-compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 5 to JESD8 - 2.5 V 0.2 V (NORMAL RANGE), AND 1.8 V TO 2.7 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT |
JESD8-5A.01 | Sep 2007 |
This standard defines power supply voltage ranges, dc interface parameters for a high speed, low voltage family of non-terminated digital circuits driving/driven by parts of the same family. The specifications in this standard represent a minimum set of 'base line' set of interface specifications for CMOS-compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 3A to JESD8 - GUNNING TRANSCEIVER LOGIC (GTL) LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-3A | May 2007 |
This Addendum No. 3 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices. Patents(): 5,023,488 Committee(s): JC-16 Free download. Registration or login required. |
||
POD18 - 1.8 V PSEUDO OPEN DRAIN I/O |
JESD8-19 | Dec 2006 |
This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedances, and the termination and calibration scheme for 1.8 V Pseudo Open Drain I/Os. The 1.8 V Pseudo Open Drain interface, also known as POD18, is primarily used to communicate with GDDR3 SGRAM devices. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 7 to JESD8 - 1.8 V + -0.15 V (NORMAL RANGE), AND 1.2 V - 1.95 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT: |
JESD8-7A | Jun 2006 |
This standard continues the voltage specification migration to the next level beyond the 2.5 V specification already established. Since this migration is driven by both process changes and performance/power, more entries can be expected in supporting required voltage levels. The rapidity of this evolution is expecting to increase because of the same feature sizes expected. Committee(s): JC-16 Free download. Registration or login required. |
||
DRIVER SPECIFICATIONS FOR 1.8 V POWER SUPPLY POINT-TO-POINT DRIVERS |
JESD8-17 | Nov 2004 |
This material is intended to be reflected in supplier specifications for point to point DDR devices ranging from 400 Mb/s to 800 Mb/s operation. It is a method to specify driver impedance with something other than a number that does not nec-essarily define how it operates in a real net This standard addresses this issue using net lengths and specifies how much uncertainty can exist in the data for each speed supported. Free download. Registration or login required. |
||
BUS INTERCONNECT LOGIC (BIC) FOR 1.2 V |
JESD8-16A | Nov 2004 |
This standard defines the electrical parameters for high-speed interfaces for use in the 1.2V electrical environment. Included in the standard are a single ended signaling interface suitable for parallel buses, and a differential signaling interface suitable for clock applications or parallel differential buses. JEDEC BIC Standard JESD8-16A continues the tradition of the JESD8-xx standards, defining electrical interfaces for the industry as new technologies and bus requirements develop. Previously, JEDEC defined standard JESD8-6, the HSTL standard, for use in 1.5V electrical environments. BIC is similar to HSTL, except the power supply voltage has dropped from 1.5V to 1.2V, and interface requirements are tightened to allow much higher speeds Committee(s): JC-16 Free download. Registration or login required. |
||
PROCEDURE FOR MEASURING INPUT CAPACITANCE USING A VECTOR NETWORK ANALYZER (VNA): |
JEP147 | Oct 2003 |
This procedure describes a recommended way to measure pin capacitance of devices with SSTL (Stub Series Terminated Logic) interface pins by use of a Vector Network Analyzer. One purpose of this standard procedure is to reduce the lengthy and often inaccurate footnote - usually found around the specification of pin parasitics - to a simple reference to this document. In special cases modifying statements may adjust this procedure to the special needs of certain component. Free download. Registration or login required. |
||
STUB SERIES TERMINATED LOGIC FOR 1.8 V (SSTL_18): |
JESD8-15A | Sep 2003 |
This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the SSTL_18 logic switching range, nominally 0 V to 1.8 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. The VDD value is not specified in this standard; however VDD and VDDQ will have the same voltage level in many cases. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 9B to JESD8 - STUB SERIES TERMINATED LOGIC FOR 2.5 VOLTS (SSTL_2): Includes Errata and Corrected Page 7 as of October 18, 2002. |
JESD8-9B | May 2002 |
This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the SSTL_2 logic switching range, nominally 0 V to 2.5 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. This standard has been developed particularly with the objective of providing a relatively simple upgrade path from MOS push-pull interface designs. The standard is particularly intended to improve operation in situations where busses must be isolated from relatively large stubs. Committee(s): JC-16 Free download. Registration or login required. |
||
SCALABLE LOW-VOLTAGE SIGNALING FOR 400 MV (SLVS-400): |
JESD8-13 | Oct 2001 |
This standard defines the input, output, and termination specifications for differential signaling in the SLVS-400 environment, nominally between 0 and 400 mV. Power supplies other than the nominal 800 mV power for the SLVS interface are not specified. Committee(s): JC-16 Free download. Registration or login required. |
||
I/O DRIVERS AND RECEIVERS WITH CONFIGURABLE COMMUNICATION VOLTAGE, IMPEDANCE, AND RECEIVER THRESHOLD: |
JESD67 | Feb 1999 |
This standard attempts to aid in the design of electronic systems comprised of components that operate at several different supply voltages. This document covers respectively configurable I/O voltage, receiver type and switchpoint, and driver impedance. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 8 to JESD8 - STUB SERIES TERMINATED LOGIC FOR 3.3 VOLTS (SSTL_3) A 3.3 V VOLTAGE BASED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS |
JESD8-8 | Aug 1996 |
This standard is a result of a major effort by the JC-16 Committee to develop a high performance CMOS-based interface suitable for high speed main memory applications in excess of 125 MHz. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 6 to JESD8 - HIGH SPEED TRANSCEIVER LOGIC (HSTL)- A 1.5 V OUTPUT BUFFER SUPPLY VOLTAGE BASED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-6 | Aug 1995 |
This standard is a 1.5 volt high performance CMOS-based interface document suitable for high I/O count CMOS and BiCMOS devices operating at frequencies in excess of 200 Mhz. Committee(s): JC-16 Free download. Registration or login required. |
||
INTERFACE STANDARD FOR NOMINAL 0.3 V/3.3 V SUPPLY DIGITAL INTEGRATED CIRCUITSStatus: Incorporatedinto JESD8-A, June 1994. JESD8-A was replaced by JESD8-B, September 1999. |
JESD8-1A | Jun 1994 |
Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 1 to JESD8: INTERFACE STANDARD FOR LOW VOLTAGE TTL-COMPATIBLE (LVTTL) VLSI DIGITAL CIRCUITSStatus: Incorporatedinto JESD8-A, June 1994. JESD8-A was replaced by JESD8-B, September 1999. |
JESD8-1 | Jun 1994 |
Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 4 to JESD8 - CENTER-TAP-TERMINATED (CTT) INTERFACE LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-4 | Nov 1993 |
This Addendum No. 4 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices that can be a super-set of LVCMOS and LVTTL. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 2 to JESD8 - STANDARD FOR OPERATING VOLTAGES AND INTERFACE LEVELS FOR LOW VOLTAGE EMITTER-COUPLED LOGIC (ECL) INTEGRATED CIRCUITS: |
JESD8-2 | Mar 1993 |
This Addendum No. 2 to JEDEC Standard No. 8 provides standard operating voltage and interface levels that can be used by designers and application engineers as they develop and introduce new products. Covers the ECL logic family designated 300K ECL. The 300K ECL family is Voltage and Temperature Compensated, with I/O interface levels compatible with the existing 100K ECL and 101K ECl families. Committee(s): JC-16 Free download. Registration or login required. |