Standards & Documents Search

Displaying 1 - 10 of 39 documents. Show 5 | 10 | 20 results per page.

Title	Document #	Date
UNIFIED WIDE POWER SUPPLY VOLTAGE RANGE CMOS DC INTERFACE STANDARD FOR NON-TERMINATED DIGITAL INTEGRATED CIRCUITS	JESD8-23	Oct 2009
This standard defines DC interface parameters and test conditions for a family of non-terminated CMOS digital circuits intended for use over a wide power supply voltage range. The standard bridges a number of existing JEDEC standards in the JESD8-x family to facilitate applications that operate over an ultra-wide power supply voltage range in order to achieve lower power dissipation or higher performance. Committee(s): JC-16 Free download. Registration or login required.
STUB SERIES TERMINATED LOGIC FOR 1.8 V (SSTL_18):	JESD8-15A	Sep 2003
This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the SSTL_18 logic switching range, nominally 0 V to 1.8 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. The VDD value is not specified in this standard; however VDD and VDDQ will have the same voltage level in many cases. Committee(s): JC-16 Free download. Registration or login required.
Serial Interface for Data Converters	JESD204D	Dec 2023
This standard describes a serialized interface between data converters and logic devices. It contains normative information to enable designers to implement devices that communicate with other devices covered by this specification. Informative annexes are included to clarify and exemplify the document. Committee(s): JC-16 Free download. Registration or login required.
SCALABLE LOW-VOLTAGE SIGNALING FOR 400 MV (SLVS-400):	JESD8-13	Oct 2001
This standard defines the input, output, and termination specifications for differential signaling in the SLVS-400 environment, nominally between 0 and 400 mV. Power supplies other than the nominal 800 mV power for the SLVS interface are not specified. Committee(s): JC-16 Free download. Registration or login required.
PROCEDURE FOR MEASURING INPUT CAPACITANCE USING A VECTOR NETWORK ANALYZER (VNA):	JEP147	Oct 2003
This procedure describes a recommended way to measure pin capacitance of devices with SSTL (Stub Series Terminated Logic) interface pins by use of a Vector Network Analyzer. One purpose of this standard procedure is to reduce the lengthy and often inaccurate footnote - usually found around the specification of pin parasitics - to a simple reference to this document. In special cases modifying statements may adjust this procedure to the special needs of certain component. Committee(s): JC-16, JC-16.2 Free download. Registration or login required.
POD18 - 1.8 V PSEUDO OPEN DRAIN I/O	JESD8-19	Dec 2006
This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedances, and the termination and calibration scheme for 1.8 V Pseudo Open Drain I/Os. The 1.8 V Pseudo Open Drain interface, also known as POD18, is primarily used to communicate with GDDR3 SGRAM devices. Committee(s): JC-16 Free download. Registration or login required.
POD15 - 1.5 V PSEUDO OPEN DRAIN I/O	JESD8-20A.01	Aug 2022
Terminology Update. This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedance, and the termination and calibration scheme for 1.5 V Pseudo Open Drain I/Os. The 1.5 V Pseudo Open Drain interface, also known as POD15, is primarily used to communicate with GDDR4 and GDDR5 SGRAM devices. Item 135.01 Committee(s): JC-16 Free download. Registration or login required.
POD135 - 1.35 V PSEUDO OPEN DRAIN I/O	JESD8-21C.01	Jun 2022
Editorial, Terminology Update. This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedance's, and the termination and calibration scheme for 1.35 V Pseudo Open Drain I/Os. The 1.35 V Pseudo Open Drain interface, also known as POD135, is primarily used to communicate with GDDR5 or GDDR5M SGRAM devices. Item 146.01B Committee(s): JC-16 Free download. Registration or login required.
POD125 - 1.25 V PSEUDO OPEN DRAIN I/O	JESD8-30A.01	Jun 2022
Editorial Terminology Update. This standard defines the DC and AC single-ended (data) and differential (clock) operating conditions, I/O impedances, and the termination and calibration scheme for 1.25 V Pseudo Open Drain I/Os. The 1.25 V Pseudo Open Drain interface, also known as POD125, is primarily used to communicate with GDDR6 SGRAM devices. Committee(s): JC-16 Free download. Registration or login required.
POD12 ‐ 1.2 V PSEUDO OPEN DRAIN INTERFACE	JESD8-24	Aug 2011
This document defines the 1.2 V Pseudo Open Drain Interface family of interface standards, POD12, which are generally expected to be implemented with differential amp-based input buffers that, when in single-ended mode, employ an externally supplied (or internal supplied) reference voltage controlled trip-point. Although this standard is named for the nominal value of VDDQ to be used, it is the input trip-point value that provides for inter operability of POD12 compliant devices. Committee(s): JC-16 Free download. Registration or login required.

Standards & Documents Search

UNIFIED WIDE POWER SUPPLY VOLTAGE RANGE CMOS DC INTERFACE STANDARD FOR NON-TERMINATED DIGITAL INTEGRATED CIRCUITS

STUB SERIES TERMINATED LOGIC FOR 1.8 V (SSTL_18):

Serial Interface for Data Converters

SCALABLE LOW-VOLTAGE SIGNALING FOR 400 MV (SLVS-400):

PROCEDURE FOR MEASURING INPUT CAPACITANCE USING A VECTOR NETWORK ANALYZER (VNA):

POD18 - 1.8 V PSEUDO OPEN DRAIN I/O

POD15 - 1.5 V PSEUDO OPEN DRAIN I/O

POD135 - 1.35 V PSEUDO OPEN DRAIN I/O

POD125 - 1.25 V PSEUDO OPEN DRAIN I/O

POD12 ‐ 1.2 V PSEUDO OPEN DRAIN INTERFACE

Pages

Search by Keyword or Document Number

Filter by committees:

Filter by document type:

Filter by keywords: