Global Standards for the Microelectronics Industry
Standards & Documents Search
Title | Document # | Date |
---|---|---|
PROCEDURE FOR MEASURING INPUT CAPACITANCE USING A VECTOR NETWORK ANALYZER (VNA): |
JEP147 | Oct 2003 |
This procedure describes a recommended way to measure pin capacitance of devices with SSTL (Stub Series Terminated Logic) interface pins by use of a Vector Network Analyzer. One purpose of this standard procedure is to reduce the lengthy and often inaccurate footnote - usually found around the specification of pin parasitics - to a simple reference to this document. In special cases modifying statements may adjust this procedure to the special needs of certain component. Free download. Registration or login required. |
||
DRIVER SPECIFICATIONS FOR 1.8 V POWER SUPPLY POINT-TO-POINT DRIVERS |
JESD8-17 | Nov 2004 |
This material is intended to be reflected in supplier specifications for point to point DDR devices ranging from 400 Mb/s to 800 Mb/s operation. It is a method to specify driver impedance with something other than a number that does not nec-essarily define how it operates in a real net This standard addresses this issue using net lengths and specifies how much uncertainty can exist in the data for each speed supported. Free download. Registration or login required. |
||
BUS INTERCONNECT LOGIC (BIC) FOR 1.2 V |
JESD8-16A | Nov 2004 |
This standard defines the electrical parameters for high-speed interfaces for use in the 1.2V electrical environment. Included in the standard are a single ended signaling interface suitable for parallel buses, and a differential signaling interface suitable for clock applications or parallel differential buses. JEDEC BIC Standard JESD8-16A continues the tradition of the JESD8-xx standards, defining electrical interfaces for the industry as new technologies and bus requirements develop. Previously, JEDEC defined standard JESD8-6, the HSTL standard, for use in 1.5V electrical environments. BIC is similar to HSTL, except the power supply voltage has dropped from 1.5V to 1.2V, and interface requirements are tightened to allow much higher speeds Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 7 to JESD8 - 1.8 V + -0.15 V (NORMAL RANGE), AND 1.2 V - 1.95 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT: |
JESD8-7A | Jun 2006 |
This standard continues the voltage specification migration to the next level beyond the 2.5 V specification already established. Since this migration is driven by both process changes and performance/power, more entries can be expected in supporting required voltage levels. The rapidity of this evolution is expecting to increase because of the same feature sizes expected. Committee(s): JC-16 Free download. Registration or login required. |
||
POD18 - 1.8 V PSEUDO OPEN DRAIN I/O |
JESD8-19 | Dec 2006 |
This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedances, and the termination and calibration scheme for 1.8 V Pseudo Open Drain I/Os. The 1.8 V Pseudo Open Drain interface, also known as POD18, is primarily used to communicate with GDDR3 SGRAM devices. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 3A to JESD8 - GUNNING TRANSCEIVER LOGIC (GTL) LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-3A | May 2007 |
This Addendum No. 3 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices. Patents(): 5,023,488 Committee(s): JC-16 Free download. Registration or login required. |
||
INTERFACE STANDARD FOR NOMINAL 3.0 V/3.3 V SUPPLY DIGITAL INTEGRATED CIRCUITS: |
JESD8C.01 | Sep 2007 |
This standard (a replacement of JEDEC Standards No. 8, 8-1, 8-1-A, and 8-A) defines dc interface parameters for a family of digital circuits operating from a power supply of nominal 3.0 V/3.3. V and driving/driven by parts of the same family. The specifications in this standard represent a minimum set of 'base line' set of interface specifications for LVTTL-compatible and LVCMOS-compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |
||
1.0 V +/- 0.1 V (NORMAL RANGE) AND 0.7 V - 1.1 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUITS: |
JESD8-14A.01 | Sep 2007 |
This new standard provides specifications that will be used by several companies in new 1.0 V products designed in 0.10-0.12 um CMOS technologies, and in components that interface with them. This standard defines power supply voltage ranges, dc interface and switching parameters for a high speed, low voltage family of nonterminated digital circuits driving/driven by parts of the same family, or mixed families which comply with the input receiver specifications. The specifications in this standard represent a minimum set of interface specifications for CMOS compatible circuits. This version is a minor editorial revision as noted in Annex A. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 5 to JESD8 - 2.5 V 0.2 V (NORMAL RANGE), AND 1.8 V TO 2.7 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT |
JESD8-5A.01 | Sep 2007 |
This standard defines power supply voltage ranges, dc interface parameters for a high speed, low voltage family of non-terminated digital circuits driving/driven by parts of the same family. The specifications in this standard represent a minimum set of 'base line' set of interface specifications for CMOS-compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |
||
1.2 V +/- 0.1 V (NORMAL RANGE) AND 0.8 - 1.3 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUITS: |
JESD8-12A.01 | Sep 2007 |
This standard defines power supply voltage ranges, dc interface and switching parameters for a high speed, low voltage family of nonterminated digital circuits driving/driven by parts of the same family, or mixed families which comply with the input receiver specifications. The specifications in this standard represent a minimum set of interface specifications for CMOS compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |