Global Standards for the Microelectronics Industry
Standards & Documents Search
| Title | Document # |
Date |
|---|---|---|
MULTI-WIRE MULTI-LEVEL I/O STANDARD |
JESD247 | Jun 2016 |
This standard defines the DC and AC operating conditions, I/O impedances, termination characteristics, and compliance test methods of I/O drivers and receivers used in multi-wire, multi-level signaling interfaces. The multi-wire interfaces defined by this specification all utilize quaternary signal levels. Item 153.00 Patents(): Kandou Committee(s): JC-16 Free download. Registration or login required. |
||
300 mV INTERFACE |
JESD8-28 | Jun 2015 |
This standard is to define and interface with a CMOS rail to rail signal that uses a 300 mV signal swing. This specification defines the maximum signaling rate, the signal Committee(s): JC-16 Free download. Registration or login required. |
||
HSUL_12 LPDDR2 AND LPDDR3 I/O WITH OPTIONAL ODT |
JESD8-22B | Apr 2014 |
This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the High Speed Unterminated Logic (HSUL_12) logic switching range, nominally 0 V to 1.2 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. Committee(s): JC-16 Free download. Registration or login required. |
||
1.2 V HIGH-SPEED LVCMOS (HS_LVCMOS) INTERFACE |
JESD8-26 | Sep 2011 |
This standard defines the dc and ac input levels, output levels, and input overshoot and undershoot specifications for the 1.2 V High-speed LVCMOS (HS_LVCMOS) interface. The non-terminated interface has a switching range that is nominally expected to be 0 V to 1.2 V and is primarily intended to support communications with Wide I/O SDRAM devices. Committee(s): JC-16 Free download. Registration or login required. |
||
POD10-1.0 V PSUEDO OPEN DRAIN INTERFACE |
JESD8-25 | Sep 2011 |
This document defines the 1.0 V Pseudo Open Drain Interface family of interface standards, POD10, which are generally expected to be implemented with differential amp-based input buffers that, when in single-ended mode, employ an externally supplied (or internal supplied) reference voltage controlled trip-point. Committee(s): JC-16 Free download. Registration or login required. |
||
POD12 ‐ 1.2 V PSEUDO OPEN DRAIN INTERFACE |
JESD8-24 | Aug 2011 |
This document defines the 1.2 V Pseudo Open Drain Interface family of interface standards, POD12, which are generally expected to be implemented with differential amp-based input buffers that, when in single-ended mode, employ an externally supplied (or internal supplied) reference voltage controlled trip-point. Committee(s): JC-16 Free download. Registration or login required. |
||
UNIFIED WIDE POWER SUPPLY VOLTAGE RANGE CMOS DC INTERFACE STANDARD FOR NON-TERMINATED DIGITAL INTEGRATED CIRCUITS |
JESD8-23 | Oct 2009 |
This standard defines DC interface parameters and test conditions for a family of non-terminated CMOS digital circuits intended for use over a wide power supply voltage range. The standard bridges a number of existing JEDEC standards in the JESD8-x family to facilitate applications that operate over an ultra-wide power supply voltage range in order to achieve lower power dissipation or higher performance. Committee(s): JC-16 Free download. Registration or login required. |
||
FBDIMM SPECIFICATION: HIGH SPEED DIFFERENTIAL PTP LINK AT 1.5 V |
JESD8-18A | Mar 2008 |
This specification defines the high-speed differential point-to-point signaling link for FBDIMM, operating at the buffer supply voltage of 1.5V that is provided at the FBDIMM DIMM connector. This specification also applies to FBDIMM host chips which may operate with a different supply voltage. The link consists of a transmitter and a receiver and the interconnect in between them. The transmitter sends serialized bits into a lane and the receiver accepts the electrical signals of the serialized bits and transforms them into a serialized bit-stream. The first generation FBDIMM link is being specified to operate from 3.2 to 4.8 Gb/s. The specifications are defined for three distinct bit-rates of operation: 3.2 Gb/s, 4.0 Gb/s and 4.8 Gb/s. Patents(): There are known patent issues that are common to all FBDIMM related specifications. See document for link to FBDIMM Patents. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 5 to JESD8 - 2.5 V 0.2 V (NORMAL RANGE), AND 1.8 V TO 2.7 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT |
JESD8-5A.01 | Sep 2007 |
This standard defines power supply voltage ranges, dc interface parameters for a high speed, low voltage family of non-terminated digital circuits driving/driven by parts of the same family. The specifications in this standard represent a minimum set of 'base line' set of interface specifications for CMOS-compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |
||
INTERFACE STANDARD FOR NOMINAL 3.0 V/3.3 V SUPPLY DIGITAL INTEGRATED CIRCUITS: |
JESD8C.01 | Sep 2007 |
This standard (a replacement of JEDEC Standards No. 8, 8-1, 8-1-A, and 8-A) defines dc interface parameters for a family of digital circuits operating from a power supply of nominal 3.0 V/3.3. V and driving/driven by parts of the same family. The specifications in this standard represent a minimum set of 'base line' set of interface specifications for LVTTL-compatible and LVCMOS-compatible circuits. Committee(s): JC-16 Free download. Registration or login required. |
||
