Global Standards for the Microelectronics Industry
Standards & Documents Search
| Title | Document # | Date |
|---|---|---|
ADDENDUM No. 3A to JESD8 - GUNNING TRANSCEIVER LOGIC (GTL) LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-3A | May 2007 |
This Addendum No. 3 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices. Patents(): 5,023,488 Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 4 to JESD8 - CENTER-TAP-TERMINATED (CTT) INTERFACE LOW-LEVEL, HIGH-SPEED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-4 | Nov 1993 |
This Addendum No. 4 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices that can be a super-set of LVCMOS and LVTTL. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 6 to JESD8 - HIGH SPEED TRANSCEIVER LOGIC (HSTL)- A 1.5 V OUTPUT BUFFER SUPPLY VOLTAGE BASED INTERFACE STANDARD FOR DIGITAL INTEGRATED CIRCUITS: |
JESD8-6 | Aug 1995 |
This standard is a 1.5 volt high performance CMOS-based interface document suitable for high I/O count CMOS and BiCMOS devices operating at frequencies in excess of 200 Mhz. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 7 to JESD8 - 1.8 V + -0.15 V (NORMAL RANGE), AND 1.2 V - 1.95 V (WIDE RANGE) POWER SUPPLY VOLTAGE AND INTERFACE STANDARD FOR NONTERMINATED DIGITAL INTEGRATED CIRCUIT: |
JESD8-7A | Jun 2006 |
This standard continues the voltage specification migration to the next level beyond the 2.5 V specification already established. Since this migration is driven by both process changes and performance/power, more entries can be expected in supporting required voltage levels. The rapidity of this evolution is expecting to increase because of the same feature sizes expected. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 9B to JESD8 - STUB SERIES TERMINATED LOGIC FOR 2.5 VOLTS (SSTL_2): Includes Errata and Corrected Page 7 as of October 18, 2002. |
JESD8-9B | May 2002 |
This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the SSTL_2 logic switching range, nominally 0 V to 2.5 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. This standard has been developed particularly with the objective of providing a relatively simple upgrade path from MOS push-pull interface designs. The standard is particularly intended to improve operation in situations where busses must be isolated from relatively large stubs. Committee(s): JC-16 Free download. Registration or login required. |
||
UNIFIED WIDE POWER SUPPLY VOLTAGE RANGE CMOS DC INTERFACE STANDARD FOR NON-TERMINATED DIGITAL INTEGRATED CIRCUITS |
JESD8-23 | Oct 2009 |
This standard defines DC interface parameters and test conditions for a family of non-terminated CMOS digital circuits intended for use over a wide power supply voltage range. The standard bridges a number of existing JEDEC standards in the JESD8-x family to facilitate applications that operate over an ultra-wide power supply voltage range in order to achieve lower power dissipation or higher performance. Committee(s): JC-16 Free download. Registration or login required. |
||
POD18 - 1.8 V PSEUDO OPEN DRAIN I/O |
JESD8-19 | Dec 2006 |
This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedances, and the termination and calibration scheme for 1.8 V Pseudo Open Drain I/Os. The 1.8 V Pseudo Open Drain interface, also known as POD18, is primarily used to communicate with GDDR3 SGRAM devices. Committee(s): JC-16 Free download. Registration or login required. |
||
POD15 - 1.5 V PSEUDO OPEN DRAIN I/O |
JESD8-20A.01 | Aug 2022 |
Terminology Update. This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedance, and the termination and calibration scheme for 1.5 V Pseudo Open Drain I/Os. The 1.5 V Pseudo Open Drain interface, also known as POD15, is primarily used to communicate with GDDR4 and GDDR5 SGRAM devices. Item 135.01 Committee(s): JC-16 Free download. Registration or login required. |
||
FBDIMM SPECIFICATION: HIGH SPEED DIFFERENTIAL PTP LINK AT 1.5 V |
JESD8-18A | Mar 2008 |
This specification defines the high-speed differential point-to-point signaling link for FBDIMM, operating at the buffer supply voltage of 1.5V that is provided at the FBDIMM DIMM connector. This specification also applies to FBDIMM host chips which may operate with a different supply voltage. The link consists of a transmitter and a receiver and the interconnect in between them. The transmitter sends serialized bits into a lane and the receiver accepts the electrical signals of the serialized bits and transforms them into a serialized bit-stream. The first generation FBDIMM link is being specified to operate from 3.2 to 4.8 Gb/s. The specifications are defined for three distinct bit-rates of operation: 3.2 Gb/s, 4.0 Gb/s and 4.8 Gb/s. Patents(): There are known patent issues that are common to all FBDIMM related specifications. See document for link to FBDIMM Patents. Committee(s): JC-16 Free download. Registration or login required. |
||
ADDENDUM No. 1 to JESD8: INTERFACE STANDARD FOR LOW VOLTAGE TTL-COMPATIBLE (LVTTL) VLSI DIGITAL CIRCUITSStatus: Incorporatedinto JESD8-A, June 1994. JESD8-A was replaced by JESD8-B, September 1999. |
JESD8-1 | Jun 1994 |
Committee(s): JC-16 Free download. Registration or login required. |
||
