Standards & Documents Search

Committee(s): JC-16

Free download. Registration or login required.

This standard is a 1.5 volt high performance CMOS-based interface document suitable for high I/O count CMOS and BiCMOS devices operating at frequencies in excess of 200 Mhz.

Committee(s): JC-16

Free download. Registration or login required.

This standard attempts to aid in the design of electronic systems comprised of components that operate at several different supply voltages. This document covers respectively configurable I/O voltage, receiver type and switchpoint, and driver impedance.

Committee(s): JC-16

Free download. Registration or login required.

This standard defines the input, output specifications and ac test conditions for devices that are designed to operate in the SSTL_2 logic switching range, nominally 0 V to 2.5 V. The standard may be applied to ICs operating with separate VDD and VDDQ supply voltages. This standard has been developed particularly with the objective of providing a relatively simple upgrade path from MOS push-pull interface designs. The standard is particularly intended to improve operation in situations where busses must be isolated from relatively large stubs.

Committee(s): JC-16

Free download. Registration or login required.

This standard defines the electrical parameters for high-speed interfaces for use in the 1.2V electrical environment. Included in the standard are a single ended signaling interface suitable for parallel buses, and a differential signaling interface suitable for clock applications or parallel differential buses. JEDEC BIC Standard JESD8-16A continues the tradition of the JESD8-xx standards, defining electrical interfaces for the industry as new technologies and bus requirements develop. Previously, JEDEC defined standard JESD8-6, the HSTL standard, for use in 1.5V electrical environments. BIC is similar to HSTL, except the power supply voltage has dropped from 1.5V to 1.2V, and interface requirements are tightened to allow much higher speeds

Committee(s): JC-16

Free download. Registration or login required.

This standard continues the voltage specification migration to the next level beyond the 2.5 V specification already established. Since this migration is driven by both process changes and performance/power, more entries can be expected in supporting required voltage levels. The rapidity of this evolution is expecting to increase because of the same feature sizes expected.

Committee(s): JC-16

Free download. Registration or login required.

This Addendum No. 3 to JEDEC Standard No. 8 defines the dc input and output specifications for a low-level, high-speed interface for integrated devices.

Patents(): 5,023,488

Committee(s): JC-16

Free download. Registration or login required.

This new standard provides specifications that will be used by several companies in new 1.5 V products designed in 0.12-0.15 um CMOS technologies, and in components that interface with them. The specifications allow limited interoperability with products using the existing JEDEC HSTL specification (JESD8-6). This version is a minor editorial revision as noted in Annex A.

Committee(s): JC-16

Free download. Registration or login required.

This new standard provides specifications that will be used by several companies in new 1.0 V products designed in 0.10-0.12 um CMOS technologies, and in components that interface with them. This standard defines power supply voltage ranges, dc interface and switching parameters for a high speed, low voltage family of nonterminated digital circuits driving/driven by parts of the same family, or mixed families which comply with the input receiver specifications. The specifications in this standard represent a minimum set of interface specifications for CMOS compatible circuits. This version is a minor editorial revision as noted in Annex A.

Committee(s): JC-16

Free download. Registration or login required.

This specification defines the high-speed differential point-to-point signaling link for FBDIMM, operating at the buffer supply voltage of 1.5V that is provided at the FBDIMM DIMM connector. This specification also applies to FBDIMM host chips which may operate with a different supply voltage. The link consists of a transmitter and a receiver and the interconnect in between them. The transmitter sends serialized bits into a lane and the receiver accepts the electrical signals of the serialized bits and transforms them into a serialized bit-stream. The first generation FBDIMM link is being specified to operate from 3.2 to 4.8 Gb/s. The specifications are defined for three distinct bit-rates of operation: 3.2 Gb/s, 4.0 Gb/s and 4.8 Gb/s.

Patents(): There are known patent issues that are common to all FBDIMM related specifications. See document for link to FBDIMM Patents.

Committee(s): JC-16

Free download. Registration or login required.

This document defines the 1.2 V Pseudo Open Drain Interface family of interface standards, POD12, which are generally expected to be implemented with differential amp-based input buffers that, when in single-ended mode, employ an externally supplied (or internal supplied) reference voltage controlled trip-point.
Although this standard is named for the nominal value of VDDQ to be used, it is the input trip-point value that provides for inter operability of POD12 compliant devices.

Committee(s): JC-16

Free download. Registration or login required.

This standard defines the dc and ac input levels, output levels, and input overshoot and undershoot specifications for the 1.2 V High-speed LVCMOS (HS_LVCMOS) interface. The non-terminated interface has a switching range that is nominally expected to be 0 V to 1.2 V and is primarily intended to support communications with Wide I/O SDRAM devices.

Committee(s): JC-16

Free download. Registration or login required.

This standard is to define and interface with a CMOS rail to rail signal that uses a 300 mV signal swing. This specification defines the maximum signaling rate, the signal
levels, overshoot and undershoot limits, and the maximum input capacitance. This interface is useful in short distance applications, typically of less than 5 mm.

Committee(s): JC-16

Free download. Registration or login required.

This standard defines power supply voltage range, dc interface, switching parameter and overshoot/undershoot for high speed low voltage swing terminated NMOS driver family digital circuits with 0.6V supply. The specifications in this standard represent a minimum set of interface specifications for low voltage terminated circuits. Item 180.24.

Committee(s): JC-16

Free download. Registration or login required.

This standard defines power supply voltage range, dc interface, switching parameter and overshoot/undershoot for high speed low voltage swing terminated NMOS driver family digital circuits. The specifications in this standard represent a minimum set of interface specifications for low voltage terminated circuits. Item 159.03

Committee(s): JC-16

Free download. Registration or login required.

This is a minor editorial change to JESD204C, the details can be found in Annex A. This standard describes a serialized interface between data converters and logic devices. It contains normative information to enable designers to implement devices that communicate with other devices covered by this document. Informative sections are included to clarify and exemplify the standard. Item 192.02B.

Committee(s): JC-16

Free download. Registration or login required.

Editorial, Terminology Update. This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedance's, and the termination and calibration scheme for 1.35 V Pseudo Open Drain I/Os. The 1.35 V Pseudo Open Drain interface, also known as POD135, is primarily used to communicate with GDDR5 or GDDR5M SGRAM devices. Item 146.01B

Committee(s): JC-16

Free download. Registration or login required.