Standards & Documents Search

This test is used to determine the terrestrial cosmic ray Soft Error Rate (SER) sensitivity of solid state volatile memory arrays and bistable logic elements (e.g., flip-flops) by measuring the error rate while the device is irradiated in a neutron or proton beam of known flux. The results of this accelerated test can be used to estimate the terrestrial cosmic ray induced SER for a given terrestrial cosmic ray radiation environment. This test cannot be used to project alpha-particle induced SER.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.1

Free download. Registration or login required.

This test method defines the requirements and procedures for terrestrial destructive* single-event effects (SEE) for example, single-event breakdown (SEB), single-event latch-up (SEL) and single-event gate rupture (SEGR) testing . It is valid when using an accelerator, generating a nucleon beam of either; 1) Mono-energetic protons or mono-energetic neutrons of at least 150 MeV energy, or 2) Neutrons from a spallation spectrum with maximum energy of at least 150 MeV. This test method does not apply to testing that uses beams with particles heavier than protons.

*This test method addresses a separate risk than does JESD89 tests for non-destructive SEE due to cosmic radiation effects on terrestrial applications.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.1

Free download. Registration or login required.

The method described in this document applies to all reliability mechanisms associated with electronic devices. The purpose of this standard is to provide a reference for developing acceleration models for defect-related and wear-out mechanisms in electronic devices.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.3

Free download. Registration or login required.

External visual inspection is an examination of the external surfaces, construction, marking, and workmanship of a finished package or component. External visual is a noninvasive and nondestructive test. It is functional for qualification, quality monitoring, and lot acceptance.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.1

Free download. Registration or login required.

This test method is offered as a standardized procedure to determine the total dose limit of DRAMs by measuring its refresh time tRef degradation after the device is irradiated with an X-Ray dose. This test method is applicable to any packaged device that contains a DRAM die or any embedded DRAM structure. Some indirect test methods such as wafer level characterization of total dose induced changes in leakage of access transistors are not described in this standard but are permissible as long as a good correlation is established.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.1

Free download. Registration or login required.

This publication provides an overview of solder void types, outlines current metrologies and test methods used for pre-SMPT solder void characterization and potential limitations, and prescribes sampling strategy for data collection, and tolerance guidelines for corrective measures.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.1

Free download. Registration or login required.

This test is used to determine the effects of bias conditions and temperature on solid state devices over time. It simulates the devices’ operating condition in an accelerated way, and is primarily for device qualification and reliability monitoring. A form of high temperature bias life using a short duration, popularly known as burn-in, may be used to screen for infant mortality related failures. The detailed use and application of burn-in is outside the scope of this document.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This method provides users with an acoustic microscopy process flow for detecting anomalies (delaminations, cracks, mold compound voids, etc.) nondestructively in encapsulated electronic devices while achieving reproducibility.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This test is conducted to determine the robustness of a device to sudden exposure to extreme changes in temperature and to the effect of alternate exposures to these extremes.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This report only covers the procedures and requirements specified in ANSI/ESDA/JEDEC JS-002.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This standard applies to single-, dual- and triple-chamber temperature cycling in an air or other gaseous medium and covers component and solder interconnection testing.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.1

Free download. Registration or login required.

This document describes design of test structures needed to assess the reliability of aluminum-copper, refractory metal barrier interconnect systems. This includes any metal interconnect system where a refractory metal barrier or other barrier material prevents the flow of aluminum and/or copper metal ions from moving between interconnect layers. This document is not intended to show design of test structures to assess aluminum or aluminum-copper alloy systems, without barriers to Al and Cu ion movement, nor for Cu only metal systems. Some total interconnect systems might not include barrier materials on all metal layers. The structures in this standard are designed for cases where a barrier material separates two Al or Al alloy metal layers. The purpose of this document is to describe the design of test structures needed to assess electromigration (EM) and stress-induced-void (SIV) reliability of AlCu barrier metal systems.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14.2, JC-14.21

Free download. Registration or login required.

This publication establishes guidelines and provides examples by which customers can measure their suppliers based on mutually agreed upon objective criteria.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.4

Free download. Registration or login required.

This standard establishes the procedure for testing, evaluating, and classifying devices and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined field-induced charged device model (CDM) electrostatic discharge (ESD). All packaged semiconductor devices, thin film circuits, surface acoustic wave (SAW) devices, opto-electronic devices, hybrid integrated circuits (HICs), and multi-chip modules (MCMs) containing any of these devices are to be evaluated according to this standard. This test method combines the main features of JEDEC JESD22-C101 and ANSI/ESD S5.3.1.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This test method covers X-ray imaging for terrestrial applications on packaged devices.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This test method is to measure the deviation from uniform flatness of an integrated circuit package body for the range of thermal conditions experienced during the surface-mount soldering operation.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This publication contains frequently recommended and accepted JEDEC reliability stress tests applied to surface-mount solid state devices.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

This standard applies to devices susceptible to damage by electrostatic discharge greater than 100 volts human body model (HBM) and 200 volts charged device model (CDM).

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-13, JC-14.1

Free download. Registration or login required.

This document describes procedures developed for estimating the overall integrity of gate dielectrics.

JESD263 supersedes these other 4 standards: JESD35A, JESD35-1 ADDENDUM, JESD35-2 and JESD92.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.2

Free download. Registration or login required.

This standard applies to components and assemblies that contain Pb-free and Pb-containing solders and finishes, and it describes the marking and labeling of their shipping containers to identify their 2nd  level terminal finish or material.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.4

Free download. Registration or login required.

This standard defines the requirements for the device qualification package, which the supplier provides to the customer.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

The publication provides methodologies for measurements to qualify a new semiconductor wafer process.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.2

Free download. Registration or login required.

This standard establishes the procedure for testing, evaluating, and classifying components and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined human body model (HBM) electrostatic discharge (ESD). The purpose (objective) of this standard is to establish a test method that will replicate HBM failures and provide reliable, repeatable HBM ESD test results from tester to tester, regardless of component type. Repeatable data will allow accurate classifications and comparisons of HBM ESD sensitivity levels. NOTE Data previously generated with testers meeting all waveform criteria of ANSI/ESD STM5.1-2007 or JESD22A-114F shall be considered valid test data.

Also available JTR-001-01-12: User Guide of ANSI/ESDA/JEDEC JS-001, Human Body Model Testing of Integrated Circuits

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-14, JC-14.1

Free download. Registration or login required.

This standard establishes the requirements for exchanging part data between part manufacturers and their customers for electrical and electronic products. This standard applies to all forms of electronic parts. It forms part of the Part Model XML Schema, which covers the parental structure for the electrical, physical, supply chain, assembly process classification data along with materials and substances that may be present in the supplied product or sub-products. This Guideline specifically focuses on the SupplyChain sub-section of the Part Model.

For more information visit the main JEP30 webpage.

A list of RAND License Assurance/Disclosure Forms is available to JEDEC members on the restricted Members' website. Non-members may obtain individual Assurance/Disclosure forms by requesting them from the JEDEC office.

Committee(s): JC-11, JC-11.2, JC-14.4

Free download. Registration or login required.