Global Standards for the Microelectronics Industry
Standards & Documents Search
Title![]() |
Document # | Date |
---|---|---|
3D CHIP STACK WITH THROUGH-SILICON VIAS (TSVS): Identifying, Evaluating and Understanding Reliability Interactions |
JEP158 | Nov 2009 |
To increase device bandwidth, reduce power and shrink form factor, microelectronics manufacturers are implementing three dimensional (3D) chip stacking using through silicon vias (TSVs). Chip stacking with TSVs combines silicon and packaging technologies. As a result, these new structures have unique reliability requirements. This document is a guideline that describes how to evaluate the reliability of 3D TSV silicon assemblies. Free download. Registration or login required. |
||
A Case for Lowering Component-level CDM ESD Specifications and Requirements Part II: Die-to-Die Interfaces |
JEP196 | Nov 2023 |
This white paper presents an industry-wide survey on the relevance of industry-aligned D2D CDM targets and the currently used targets for D2D interfaces. Free download. Registration or login required. |
||
A PROCEDURE FOR EXECUTING SWEAT:Status: Reaffirmed October 2012, September 2018 |
JEP119A | Aug 2003 |
This document describes an algorithm for performing the Standard Wafer Level Electromigration Accelerated Test (SWEAT) method with computer controlled instrumentation. The algorithm requires a separate iterative technique (not provided) to calculate the force current for a given target time to failure. This document does not specify what test structure to use with this procedure. However, users of this algorithm report its effectiveness on both straight-lines and via-terminated test structures. Some test-structures design features are provided in JESD87 and in ASTM 1259M - 96. Committee(s): JC-14.2 Free download. Registration or login required. |
||
A PROCEDURE FOR MEASURING N-CHANNEL MOSFET HOT-CARRIER-INDUCED DEGRADATION UNDER DC STRESS: |
JESD28-A | Dec 2001 |
This document describes an accelerated test for measuring the hot-carrier-induced degradation of a single n-channel MOSFET using dc bias. The purpose of this document is to specify a minimum set of measurements so that valid comparisons can be made between different technologies, IC processes, and process variations in a simple, consistent and controlled way. The measurements specified should be viewed as a starting point in the characterization and benchmarking of the transistor manufacturing process. Committee(s): JC-14.2 Free download. Registration or login required. |
||
A PROCEDURE FOR MEASURING P-CHANNEL MOSFET HOT-CARRIER-INDUCED DEGRADATION AT MAXIMUM GATE CURRENT UNDER DC STRESS: |
JESD60A | Sep 2004 |
This method establishes a standard procedure for accelerated testing of the hot-carrier-induced change of a p-channel MOSFET. The objective is to provide a minimum set of measurements so that accurate comparisons can be made between different technologies. The measurements specified should be viewed as a starting pint in the characterization and benchmarking of the trasistor manufacturing process. Committee(s): JC-14.2 Free download. Registration or login required. |
||
A PROCEDURE FOR MEASURING P-CHANNEL MOSFET NEGATIVE BIAS TEMPERATURE INSTABILITIESStatus: Rescinded September 2021 (JC-14.2-21-183) |
JESD90 | Nov 2004 |
This document hasbeen replaced by JESD241, September 2021. |
||
ACCELERATED MOISTURE RESISTANCE - UNBIASED AUTOCLAVEStatus: Reaffirmed January 2021 |
JESD22-A102E | Jul 2015 |
This test allows the user to evaluate the moisture resistance of nonhermetic packaged solid state devices. The Unbiased Autoclave Test is performed to evaluate the moisture resistance integrity of non-hermetic packaged solid state devices using moisture condensing or moisture saturated steam environments. It is a highly accelerated test that employs conditions of pressure, humidity and temperature under condensing conditions to accelerate moisture penetration through the external protective material (encapsulant or seal) or along the interface between the external protective material and the metallic conductors passing through it. This test is used to identify failure mechanisms internal to the package and is destructive. Committee(s): JC-14.1 Free download. Registration or login required. |
||
ACCELERATED MOISTURE RESISTANCE - UNBIASED HAST |
JESD22-A118B.01 | May 2021 |
The Unbiased HAST is performed for the purpose of evaluating the reliability of nonhermetic packaged solid-state devices in humid environments. It is a highly accelerated test which employs temperature and humidity under noncondensing conditions to accelerate the penetration of moisture through the external protective material (encapsulant or seal) or along the interface between the external protective material and the metallic conductors that pass through it. Bias is not applied in this test to ensure the failure mechanisms potentially overshadowed by bias can be uncovered (e.g., galvanic corrosion). This test is used to identify failure mechanisms internal to the package and is destructive. Committee(s): JC-14.1 Free download. Registration or login required. |
||
ADAPTER TEST BOARD RELIABILITY TEST GUIDELINES |
JEP176 | Jan 2018 |
This publication describes guidelines for applying JEDEC reliability tests and recommended testing procedures to integrated circuits that require adapter test boards for electrical and Committee(s): JC-14.3 Free download. Registration or login required. |
||
Addendum No. 1 to JESD28, N-CHANNEL MOSFET HOT CARRIER DATA ANALYSIS |
JESD28-1 | Sep 2001 |
This addendum provides data analysis examples useful in analyzing MOSFET n-channel hot-carrier-induced degradation data. This addendum to JESD28 (Hot carrier n-channel testing standard) suggests hot-carrier data analysis techniques. Committee(s): JC-14.2 Free download. Registration or login required. |