Standards & Documents Search

Displaying 1 - 20 of 35 documents. Show 5 | 10 | 20 results per page.

Title	Document #	Date
ALPHA RADIATION MEASUREMENT IN ELECTRONIC MATERIALS	JESD221	May 2011
This standard applies generally to gas proportional instruments and the use thereof in measuring materials with an alpha emissivity of less than 10 a·khr^-1·cm^-2. The primary focus will be on materials used in semiconductor fabrication. The purpose of this document is to specify the recommended method for measuring alpha emissivity in materials utilized in the manufacturing of semiconductors. The method specifically applies to gas proportional instruments and designates recommended instrument settings. In addition, the method discusses operation of ionization counters. The document also recommends methods for determining sample size and for evaluating instrument background accurately. Committee(s): JC-13, JC-13.4 Free download. Registration or login required.
ASSESSMENT OF AVERAGE OUTGOING QUALITY LEVELS IN PARTS PER MILLION (PPM)	JESD16B	Nov 2017
This standard was revised to clarify assumptions necessary to estimate AOQ, revise the minimum sample size algorithm, address small sample size concerns, and provide methods for combining groups for AOQ estimation. Derivation of any new methods for combing groups for AOQ estimation. Derivation of any new methods introduced into this document have been provided in annexes. A statistical method is based on confidence interval statistics. A procedure was established for reporting AOQ when the minimum sample size criterion is not met. Not all sections of EIA-554 are appropriate for use by device manufacturers therefore JEDEC wishes to continue using JESD16. In December 2008 the formulating committee approved to remove EIA-554 (July 1996, Reaffirmed September 2002) from the JEDEC website. To obtain a copy of EIA-554 please contact GEIA at http://www.geia.org/ Committee(s): JC-13 Free download. Registration or login required.
CERAMIC PACKAGE SPECIFICATION FOR MICROELECTRONIC PACKAGES - SUPERSEDED BY JESD9B, May 2011. Status: Rescinded, May 2011	JESD27	Aug 1993
The intent of this standard is to be a guide in the manufacture and procurement of ceramic packages, especially for the hybrid industry. Manufacturers or ceramic packages and procuring activities for these packages will now be able to use this document as the means for agreement in the imposition of minimum requirements in qualification, screening, and quality conformance. Committee(s): JC-13, JC-13.5 Free download. Registration or login required.
COUNTERFEIT ELECTRONIC PARTS: NON-PROLIFERATION FOR MANUFACTURERS	JESD243A	Jan 2021
This standard identifies the best commercial practices for mitigating and/or avoiding counterfeit products by all manufacturers of electronic parts including, but not limited to original component manufacturers (OCMs), authorized aftermarket manufacturers, and other companies that manufacture electronic parts under their own logo, name, or trademark. The types of product this standard applies to is limited to monolithic microcircuits, hybrid microcircuits and discrete semiconductor products. Committee(s): JC-13 Free download. Registration or login required.
GENERAL REQUIREMENTS FOR DISTRIBUTORS OF COMMERCIAL AND MILITARY SEMICONDUCTOR DEVICES	JESD31F	Aug 2021
This standard identifies the general requirements for Distributors that supply Commercial and Military products. This standard applies to all discrete semiconductors, integrated circuits and Hybrids, whether packaged or in wafer/die form, manufactured by all Manufacturers. The requirements defined within this document are only applicable to products for which ownership remains with the Distributor or Manufacturer. Committee(s): JC-13, JC-14.4 Free download. Registration or login required.
GENERAL REQUIREMENTS FOR DISTRIBUTORS OF MILITARY SEMICONDUCTOR DEVICES: Status: Rescinded	JEP109-C	Mar 1995
Superseded by JESD31-A, June 2001. Committee(s): JC-13 Free download. Registration or login required.
GENERAL SPECIFICATION FOR PLASTIC ENCAPSULATED MICROCIRCUITS FOR USE IN RUGGED APPLICATIONS - RESCINDED, July 2001 Status: Rescinded	JESD26-A	Apr 1990
Committee(s): JC-13.2 Free download. Registration or login required.
GENERAL STANDARD FOR STATISTICAL PROCESS CONTROL (SPC) - SUPERSEDED by EIA-557-A Status: Rescinded	JESD19	Jul 1988
Committee(s): JC-13 Free download. Registration or login required.
GUIDE FOR THE PRODUCTION AND ACQUISITION OF RADIATION-HARDNESS ASSURED MULTICHIP MODULES AND HYBRID MICROCIRCUITS:	JEP133C	Jan 2010
A revised and expanded publication for suppliers and users of radiation hardness assured (RHA) multichip modules (MCMs) and hybrid microcircuits, is now available. The document provides guidance as to how to achieve, maintain and ensure required levels of radiation-hardness given the fact that the constituent dice can have different levels of hardness assurance. It also describes how to deal with the various radiation hardness situations that an MCM/Hybrid developer, procuring activity or user will encounter. The guide is intended to supplement three relevant performance specifications: MIL-PRF-38534, MIL-PRF-38535 and MIL-PRF-19500. Committee(s): JC-13.5, JC-13.4 Free download. Registration or login required.
GUIDELINE FOR INTERNAL GAS ANALYSIS FOR MICROELECTRONIC PACKAGES Status: Reaffirmed November 2020	JEP144A	Nov 2011
This guideline is applicable to hermetically sealed microelectronic components (including discrete semiconductors, monolithic and hybrid microcircuits). Specific cases with unique packaging, materials, or environmental constraints may not find all of the following information and procedures applicable. Committee(s): JC-13 Free download. Registration or login required.
GUIDELINE FOR OBTAINING AND ACCEPTING MATERIAL FOR USE IN HYBRID/MCM PRODUCTS Status: Reaffirmed May 2023	JEP142	May 2023
This document provides guidance regarding design considerations, material assessment techniques, and recommendations for material acceptance prior to use in Hybrid/MCM Products. As part of the risk assessment process, both technical requirements and cost should be carefully considered with regard to testing/evaluating the elements of a hybrid microcircuit or Multi-chip Module (MCM) prior to material release for assembly. The intent of this document is to highlight various options that are available to the Hybrid / MCM manufacturer and provide associated guidance, not to impose a specific set of tests. Committee(s): JC-13, JC-13.5 Free download. Registration or login required.
GUIDELINES FOR NONDESTRUCTIVE PULL TESTING OF WIRE BONDS ON HYBRID DEVICES Status: Rescinded	JEP96	Jan 1977
Committee(s): JC-13.5
Guidelines for Particle Impact Noise Detection (PIND) Testing, Operator Training, and Certification	JEP114A	May 2023
This publication is a guideline to test facilities in their efforts to establish and maintain consistent particle impact noise detection (PIND) testing. Committee(s): JC-13, JC-13.5 Free download. Registration or login required.
INSPECTION CRITERIA FOR MICROELECTRONIC PACKAGES AND COVERS Status: Reaffirmed May 2023	JESD9C	May 2017
The purpose of this JEDEC standard is to verify the workmanship and requirements of microelectronic packages and covers (lids) intended for use in fabricating hybrid microelectronic circuits/microcircuits (hereafter referred to as “microcircuits”). It is applicable for use by the package manufacturer (i.e., package components), and the microcircuit manufacturer (i.e., from incoming inspection of package components through final inspection of the completed microcircuit). This standard also encompasses and replaces JESD27, Ceramic Package Specification for Microelectronic Packages. It is meant to be used in conjunction, and to not contradict, with MIL-STD-883, Test Method 2009: External Visual. Committee(s): JC-13, JC-13.5 Free download. Registration or login required.
JEDEC GUIDELINE FOR THE CHARACTERIZATION OF HYBRID POLYMERIC MATERIALS - SUPERSEDED BY JESD72, June 2001 Status: Rescinded	JEP105	Apr 1983
Committee(s): JC-13.5 Free download. Registration or login required.
JEDEC REQUIREMENTS FOR CLASS B MICROCIRCUITS Status: Rescinded, May 2006	JEP101-C	Nov 1995
Committee(s): JC-13.2 Free download. Registration or login required.
MANAGEMENT OF COMPONENT OBSOLESCENCE BY GOVERNMENT CONTRACTORS: RESCINDED, October 2002 Status: RescindedOctober 2002	JESD53	Jan 1996
Committee(s): JC-13, JC-13.2 Free download. Registration or login required.
MEASUREMENT AND REPORTING OF ALPHA PARTICLE AND TERRESTRIAL COSMIC RAY INDUCED SOFT ERRORS IN SEMICONDUCTOR DEVICES	JESD89B	Sep 2021
This specification defines the standard requirements and procedures for terrestrial soft-error-rate (SER) testing of integrated circuits and reporting of results. Both real-time (unaccelerated) and accelerated testing procedures are described. At terrestrial, Earth-based altitudes, the predominant sources of radiation include both cosmic-ray radiation and alpha-particle radiation from radioisotopic impurities in the package and chip materials. An overall assessment of a deviceís SER is complete, only when an unaccelerated test is done, or accelerated SER data for the alpha-particle component and the cosmic-radiation component has been obtained. Committee(s): JC-13, JC-13.4 Free download. Registration or login required.
PROCESS CHARACTERIZATION GUIDELINE	JEP132A.01	Dec 2022
This guideline provides a methodology to characterize a new or existing process and is applicable to any manufacturing or service process. It describes when to use specific tools such as failure mode effects analysis (FEMA), design or experiments (DOE), measurement system evaluation (MSE), capability analysis (CpK), statistical process control (SPC), and problem solving tools. It also provides a brief description of each tool. Committee(s): JC-13 Free download. Registration or login required.
PROCUREMENT QUALITY OF SOLID STATE COMPONENTS BY GOVERNMENT CONTRACTORS Status: Rescinded May 2006	EIA623	Jul 1994
Committee(s): JC-13 Free download. Registration or login required.

Standards & Documents Search

ALPHA RADIATION MEASUREMENT IN ELECTRONIC MATERIALS

ASSESSMENT OF AVERAGE OUTGOING QUALITY LEVELS IN PARTS PER MILLION (PPM)

CERAMIC PACKAGE SPECIFICATION FOR MICROELECTRONIC PACKAGES - SUPERSEDED BY JESD9B, May 2011.

COUNTERFEIT ELECTRONIC PARTS: NON-PROLIFERATION FOR MANUFACTURERS

GENERAL REQUIREMENTS FOR DISTRIBUTORS OF COMMERCIAL AND MILITARY SEMICONDUCTOR DEVICES

GENERAL REQUIREMENTS FOR DISTRIBUTORS OF MILITARY SEMICONDUCTOR DEVICES:

GENERAL SPECIFICATION FOR PLASTIC ENCAPSULATED MICROCIRCUITS FOR USE IN RUGGED APPLICATIONS - RESCINDED, July 2001

GENERAL STANDARD FOR STATISTICAL PROCESS CONTROL (SPC) - SUPERSEDED by EIA-557-A

GUIDE FOR THE PRODUCTION AND ACQUISITION OF RADIATION-HARDNESS ASSURED MULTICHIP MODULES AND HYBRID MICROCIRCUITS:

GUIDELINE FOR INTERNAL GAS ANALYSIS FOR MICROELECTRONIC PACKAGES

GUIDELINE FOR OBTAINING AND ACCEPTING MATERIAL FOR USE IN HYBRID/MCM PRODUCTS

GUIDELINES FOR NONDESTRUCTIVE PULL TESTING OF WIRE BONDS ON HYBRID DEVICES

Guidelines for Particle Impact Noise Detection (PIND) Testing, Operator Training, and Certification

INSPECTION CRITERIA FOR MICROELECTRONIC PACKAGES AND COVERS

JEDEC GUIDELINE FOR THE CHARACTERIZATION OF HYBRID POLYMERIC MATERIALS - SUPERSEDED BY JESD72, June 2001

JEDEC REQUIREMENTS FOR CLASS B MICROCIRCUITS

MANAGEMENT OF COMPONENT OBSOLESCENCE BY GOVERNMENT CONTRACTORS: RESCINDED, October 2002

MEASUREMENT AND REPORTING OF ALPHA PARTICLE AND TERRESTRIAL COSMIC RAY INDUCED SOFT ERRORS IN SEMICONDUCTOR DEVICES

PROCESS CHARACTERIZATION GUIDELINE

PROCUREMENT QUALITY OF SOLID STATE COMPONENTS BY GOVERNMENT CONTRACTORS

Pages

Search by Keyword or Document Number

Filter by committees:

Filter by document type:

Filter by keywords: